Numbers of devices the automatic communication parameter of the MODBUS(R) interface module accept for writing and reading

Accessible numbers of devices in one message are shown below.- 2000 coils and inputs for reading- 125 input registers and holding registers for reading- 1968... More Details >>

Regarding the available FB compilation methods

The MX-F Model only supports subroutine type FB. Please note that macro type FB is not supported. More Details >>

CD terminal setting of the QJ71C24N

"The CD terminal is not checked" has been set by default. More Details >>

Terminating resistors for RS-485 communication of LJ71C24

The resistance value is 110 ohm, 1/2 W. More Details >>

Difference between AJ65SBTB1-16DT1 and AJ65SBTB1-16DT2

Major differences are shown below. - AJ65SBTB1-16DT1 - Rated input current approx. 5 mA - ON voltage/ON current 15 VDC or higher/3.0 mA or higher - O... More Details >>

Programming for FX programmable controllers in ST language

You can create a program with "GX Works2" of MELSOFT applications. More Details >>

Reference manuals for programming for FX programmable controllers in ST language

The following shows the manuals for programming in ST language. - GX Works2 Beginner's Manual (Structured Project) - GX Works2 Version 1 Operating Manual... More Details >>

Clock function accuracy

It means that in an ambient temperature of 25 degrees Celsius, an error per day falls within the range of "delay of 2.57s" to "advance of 5.27s". "TYP.+2.22... More Details >>

QnA-compatible 3E frame command (0406) for the built-in Ethernet port QCPU

The built-in Ethernet port QCPU is not compatible with a multiple-block batch read command (0406) of the MC protocol. Executable commands are the following.... More Details >>

I cannot place a main base unit in a module configuration diagram with GX Works3.

You may have already placed a main base unit in the module configuration diagram. Scroll up or down in the module configuration diagram and check if a main ... More Details >>