Replacing a device in GX Developer

Select [Tool] -> [Options] from the menu of GX Developer and open <<Program common>> tab.Then select "Don't write to PLC" in "After conversion... More Details >>

How to turn OFF the "COM.ERR" LED of the Ethernet module

The LED can be turned OFF by operations from GX Developer. The operation method is as follows.(1) Connect to the CPU in the standby system in Transfer Setup.... More Details >>

Procedure for developing programs

It is necessary to install a development environment (Tornado or Wind River Workbench) and set parameters using the Setting/monitoring tools for the C Cont... More Details >>

Label programs in GX Works2

Change the program using the following method.Write the label program to the programmable controller CPU and perform PLC read for the parameters and the prog... More Details >>

Execution in a multi task environment

The QBF_Open ( ) function or mdOpen ( ) function is required for every task. Do not share the PATH acquired using an Open function with other tasks.Also, exe... More Details >>

Error code "2200" in the High-Performance model QCPU

The error code "2200" is "MISSING PARA.". It may be determined as the cause of the error that there is no parameter file in the parameter-valid drive that h... More Details >>

Connected position of branch module and extension module

The position to connect the branch module and extension module is as follows. More Details >>

END cover

An error occurs and CPU will stop. Install the END cover and reset the CPU module. More Details >>

Simultaneous use of auto logging and backup functions

The auto logging function and backup function cannot be used simultaneously. The backup function must be used after the logging function is stopped. (A singl... More Details >>

L60TCTT4(BW) accuracy

Indication accuracy - Ambient temperature: 25+/-5 degrees Celsius Full scale x (+/-0.3%) - Ambient temperature: 0 to 55degrees Celsius Full scale x (+/-0... More Details >>