If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details.

The FX5-2HC/ES is supported by the following FX5 CPU Module firmware versions and GX Works3 versions: Firmware Version

Yes, you can use MQTT communication function even in the local network by preparing a personal computer with MQTT broker

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds

Class1 communication sends and receives data at regular intervals. It is mainly used for I/O communication and motion co

You can synchronize the fixed scan communication cycle of the multiple CPU system function with the inter-module synchro

Use setup.exe in iQ Works Disk 2 (appears directly under the disk folder), to install the application.For the individual

Totem pole output encoders cannot be connected to QD62.The following types of encoders can be connected.- Open collector

An SRAM card can increase file register capacity.1MB/2MB/4MB/8MB SRAM cards are available.The numbers of file registers

Use SP.FWRITE instruction to save the data to an SD memory card in CSV format.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

391-400 of Total 1123

prev 40 / 113page next

Regarding MELSOFT Products that do not work correctly

If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details. Notes on using the Japanese Input M... More Details >>
- No：40048
- Release Date：2023/08/24 16:32
- Category： MELSEC iQ-F Series , Engineering Software
Regarding the FX5-2HC/ES-enabled CPU module firmware version

The FX5-2HC/ES is supported by the following FX5 CPU Module firmware versions and GX Works3 versions: Firmware Version ・FX5U/FX5UC CPU Module: Ver. 1.300... More Details >>
- No：44341
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , High-Speed Counter
Regarding using the MQTT Communication function in a local environment

Yes, you can use MQTT communication function even in the local network by preparing a personal computer with MQTT broker such as Eclipse Mosquitto installed.... More Details >>
- No：44367
- Release Date：2024/03/27 16:46
- Category： MELSEC iQ-F Series , Network/Communication
Regarding Selecting a mapping pattern for PDO communication

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds to the profile position mode (pp), ... More Details >>
- No：44477
- Release Date：2024/07/02 19:06
- Category： MELSEC iQ-F Series , Network/Communication
Regarding features of EtherNet/IP Communication

Class1 communication sends and receives data at regular intervals. It is mainly used for I/O communication and motion control between PLC and sensor. Class... More Details >>
- No：45485
- Release Date：2025/11/12 13:55
- Category： MELSEC iQ-F Series , Network/Communication
Combination of the MELSEC iQ-R series inter-module synchronization function and the fixed scan communication of the multiple CPU system function

You can synchronize the fixed scan communication cycle of the multiple CPU system function with the inter-module synchronization cycle of the inter-module s... More Details >>
- No：22494
- Release Date：2018/09/03 17:28
- Update：2018/09/20 11:12
- Category： MELSEC iQ-R Series
GX Works2 installation procedure from the iQ Works disk

Use setup.exe in iQ Works Disk 2 (appears directly under the disk folder), to install the application.For the individual installation procedure from the iQ W... More Details >>
- No：22516
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Whether or not totem pole output type encoders are connected

Totem pole output encoders cannot be connected to QD62.The following types of encoders can be connected.- Open collector output type encoders- CMOS level vol... More Details >>
- No：22641
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to increase file register capacity

An SRAM card can increase file register capacity.1MB/2MB/4MB/8MB SRAM cards are available.The numbers of file registers that can be used with a 1MB, 2MB, 4MB... More Details >>
- No：22687
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Writing files in CSV format

Use SP.FWRITE instruction to save the data to an SD memory card in CSV format. More Details >>
- No：22727
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series

391-400 of Total 1123

Inquiries

page top