The following are possible causes for communication not being established between the Certificate Configuration Tool for

The value of n can be set in SD414, and the range is from K1 to K32767. (Default value: K30) If n=K1, it is a 2-second

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do no

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer.

"The CD terminal is not checked" has been set by default.

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for sy

- T-branch T-branch is a connection type that branches one line from a main line. To establish a T-branch CC-

Check the following signals.- Module error signal : X0- Host data link status signal: X1- Other station data link s

It is a confirmation message telling a user that there is a device, T or C, that has become a duplicated coil in the sam

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

651-660 of Total 1110

prev 66 / 111page next

Regarding communication testing of Certificate Configuration Tool for FX5-ENET

The following are possible causes for communication not being established between the Certificate Configuration Tool for FX5-ENET and FX5-ENET. (1) Connecte... More Details >>
- No：40075
- Release Date：2023/08/25 09:06
- Category： MELSEC iQ-F Series , Network/Communication
Regarding using the 2nsec Clock Timer

The value of n can be set in SD414, and the range is from K1 to K32767. (Default value: K30) If n=K1, it is a 2-second clock timer with 1 second ON/1 second... More Details >>
- No：40019
- Release Date：2023/08/24 14:29
- Category： MELSEC iQ-F Series , CPU Module
Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37
- Category： MELSEC-F Series , Main Unit , Network/Communication
Number of occupied points of special function devices

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not occupy 8 points of the actual I/O n... More Details >>
- No：24873
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Main Unit
1 ms timer (FX3G/3GC series)

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer. More Details >>
- No：24680
- Release Date：2019/02/22 11:39
- Update：2019/02/22 14:03
- Category： MELSEC-F Series , Main Unit
CD terminal setting of the QJ71C24N

"The CD terminal is not checked" has been set by default. More Details >>
- No：23065
- Release Date：2018/09/03 17:31
- Category： Network related products
Limitation on the number of MELSOFT products that can be connected with the QJ71E71

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for system and the connections for users 1 ... More Details >>
- No：23063
- Release Date：2018/09/03 17:31
- Category： Network related products
T-branch connection and star topology for CC-Link networks

- T-branch T-branch is a connection type that branches one line from a main line. To establish a T-branch CC-Link network, use the repeater module AJ65S... More Details >>
- No：23024
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:00
- Category： Network related products
CC-Link signals checked when an error occurs

Check the following signals.- Module error signal : X0- Host data link status signal: X1- Other station data link status signal: X3 More Details >>
- No：23021
- Release Date：2018/09/03 17:31
- Category： Network related products
A message that says "A T/C coil with the same No. exists."

It is a confirmation message telling a user that there is a device, T or C, that has become a duplicated coil in the same program and the coil is given the s... More Details >>
- No：22859
- Release Date：2018/09/03 17:30
- Category： Engineering Software

651-660 of Total 1110

Inquiries

page top