Connected position of branch module and extension module

The position to connect the branch module and extension module is as follows. More Details >>

LCPU parameter number check

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1 More Details >>

Alive check for built-in Ethernet port LCPU

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An alive check message is sent five seconds... More Details >>

Logging data storage in a USB memory

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface on the front of the GOT. More Details >>

Pulse width with which the QX42 recognizes all pulses

Maximum scan time (10 ms) + Response time (10 ms) = Pulse width with which the module recognizes all pulses (20 ms) More Details >>

Cables connected to the Ethernet port on the universal model QCPU

If a direct connection is made, either type can be used.If making a connection via a hub, use a straight cable. More Details >>

Measuring temperatures with programmable controllers

The following four models are available for the purpose.- Q64TD- Q64TDV-GH- Q68TD-G-H01- Q68TD-G-H02 More Details >>

GX Developer's compatibility with 32-bit Windows 7

GX Developer Version 8.91V or later supports 32-bit Windows 7. More Details >>

Counting operation of QD62

The corresponding operation depends on the counter type selected. (1) If "Linear Counter" is selected If the present counter value exceeds the upper limi... More Details >>

Cables for CPU modules

The following Diatrend cable can be used.- DQ-U2 More Details >>