Simultaneous use of simple PLC communication function and socket communication

The socket communication can be used simultaneously with the simple PLC communication function. More Details >>

MC protocol compatibility of the built-in Ethernet port

The built-in Ethernet port is not compatible with a 4E frame. Use a QnA-compatible 3E frame. More Details >>

NTP compatibility of the SNTP function of a built-in Ethernet port QCPU

Because NTP is compatible with SNTP, you can use an NTP server for the time setting. More Details >>

How to specify intelligent function module devices

For "U**", set the first two digits of the start I/O number of an intelligent function module in three-digit representation.Example) For X/Y1F0, set "U1F". More Details >>

Communication between the Ethernet port on the universal model QCPU and the built-in Ethernet port on the LCPU

The communication can be established using the following methods. - Using the socket communication function of both CPU modules - Using the simple PLC comm... More Details >>

Ladder programs for GX Configurator-FL

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed. More Details >>

Runtime license for MX Component

A runtime license is required for all personal computers on which MX Component operates. More Details >>

Accessing file registers from the built-in Ethernet port QCPU using A-compatible 1E frames

The QnUDE(H)CPU modules with serial numbers with upper 5 digits of "14112" or later indicate compatibility with the function. The accessible device range is ... More Details >>

Replacing Q02CPU with Q02H

Yes. More Details >>

How to turn OFF the "COM.ERR" LED of the Ethernet module

The LED can be turned OFF by operations from GX Developer. The operation method is as follows.(1) Connect to the CPU in the standby system in Transfer Setup.... More Details >>