Set the size of buffer memory used for transient transmission (by dedicated instructions) to local stations, the standby

Set the number of occupied stations for a CC-Link local station using the programming tool, GX Developer or GX Works2. S

If the Network Parameter is used, CC-Link communication does not need the Select setting in the I/O assignment setting o

Major differences are shown below. - AJ65SBTB1-32DT1 <Input specifications> - Input type positive common (sin

The data link status is stored in SW80 to SW83.Each bit corresponds to a station number and a bit turns ON if the corres

Major differences in input specifications are shown below. - AJ65SBTB1-16DT - Rated input current approx. 7 mA - ON

X devices will be assigned as follows. (With this setting, 32 points are occupied per station.) - Station No. 1: X10

No, the operation speed is not changed by changing the indirectly specified value.To change the speed during operation,

Minor error 197AH (Home position return zero not passed) occurs in the following case:"[St.1066] zero pass" is OFF when

No, there is no impact on the command speed.However, the actual acceleration/deceleration time are affected by the chang

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)
Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

821-830 of Total 1082

prev 83 / 109page next

Intelligent Buffer Select of the CC-Link parameter

Set the size of buffer memory used for transient transmission (by dedicated instructions) to local stations, the standby master station, and intelligent devi... More Details >>
- No：22977
- Release Date：2018/09/03 17:31
- Category： Network related products
How to set the numbers of occupied stations for CC-Link local stations

Set the number of occupied stations for a CC-Link local station using the programming tool, GX Developer or GX Works2. Set the number for "Number of Occupied... More Details >>
- No：22980
- Release Date：2018/09/03 17:31
- Category： Network related products
PLC parameter setting for QJ61BT11N

If the Network Parameter is used, CC-Link communication does not need the Select setting in the I/O assignment setting of the PLC parameter.If the parameter ... More Details >>
- No：23002
- Release Date：2018/09/03 17:31
- Category： Network related products
Difference between AJ65SBTB1-32DTE1 and AJ65SBTB1-32DT1

Major differences are shown below. - AJ65SBTB1-32DT1 - Input type positive common (sink type) - Rated input current approx. 5 mA - ON voltage/ON curr... More Details >>
- No：23022
- Release Date：2018/09/03 17:31
- Update：2018/09/26 09:52
- Category： Network related products
How to check link errors in CC-Link slave stations

The data link status is stored in SW80 to SW83.Each bit corresponds to a station number and a bit turns ON if the corresponding station causes a data link er... More Details >>
- No：23031
- Release Date：2018/09/03 17:31
- Category： Network related products
Difference between AJ65SBTB1-16DT and AJ65SBTB1-16DT1

Major differences in input specifications are shown below. - AJ65SBTB1-16DT - Rated input current approx. 7 mA - ON voltage/ON current 14 VDC or higher/... More Details >>
- No：23035
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:24
- Category： Network related products
Assignment for connecting two CC-Link remote input modules (16-point type) (Remote net Ver.1 mode)

X devices will be assigned as follows. (With this setting, 32 points are occupied per station.) - Station No. 1: X100 to X11F -Station No. 2: X120 to X13... More Details >>
- No：23082
- Release Date：2018/09/03 17:31
- Update：2018/09/26 13:15
- Category： Network related products
Speed change

No, the operation speed is not changed by changing the indirectly specified value.To change the speed during operation, use CHGV instruction. More Details >>
- No：23555
- Release Date：2018/09/14 15:09
- Category： RnMTCPU , Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
Minor error 197AH

Minor error 197AH (Home position return zero not passed) occurs in the following case:"[St.1066] zero pass" is OFF when the re-movement to the home position ... More Details >>
- No：23560
- Release Date：2018/09/14 15:09
- Category： RnMTCPU
Speed limit value

No, there is no impact on the command speed.However, the actual acceleration/deceleration time are affected by the change. More Details >>
- No：23595
- Release Date：2018/09/14 15:09
- Category： RD77MS , RD77GF , FX5SSC , QD77MS , QD77GF , LD77MS , LD77MH , QD75MH , QD75M , QD74MH

821-830 of Total 1082

Inquiries

page top