Use the following power supply module with an input power of 200 VAC for compliance with SEMI-F47. - Power supply module

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash R

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable.

(1) The number of modules to be connected- Main block: up to 10 modules- Extension block: up to 11 modules(2) The number

The communication data code is selectable by the communication data code setting in [Parameter] -> [PLC Parameter] -&

The contents of the standard RAM and latch devices are not erased if the battery replacement is completed within three m

The built-in Ethernet port in the L series is compatible only with a QnA-compatible 3E frame of the MC protocol. An A-co

You can check the connection to the hub with bit 10 of the special register SD1288. When bit 10 of the SD1288 is on, the

The capacity file registers currently have can be checked in the file register setting section ([PLC Parameter] -> [P

If a direct connection is made, either type can be used.If making a connection via a hub, use a straight cable.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

881-890 of Total 1123

prev 89 / 113page next

Compliance with SEMI-F47 for L series power supply module

Use the following power supply module with an input power of 200 VAC for compliance with SEMI-F47. - Power supply module: L61PWith an input power of 100 VAC,... More Details >>
- No：22768
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Remedy to an error message when performing online change in LCPU

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash ROM). Therefore, additional online cha... More Details >>
- No：22763
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:50
- Category： MELSEC-L Series
KeepAlive setting for built-in Ethernet port in LCPU

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable. More Details >>
- No：22760
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
The number of LCPU extension blocks

(1) The number of modules to be connected- Main block: up to 10 modules- Extension block: up to 11 modules(2) The number of extension blocks- L02CPU, L02CPU-... More Details >>
- No：22750
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Communication data code of the MC protocol for the built-in Ethernet port in LCPU

The communication data code is selectable by the communication data code setting in [Parameter] -> [PLC Parameter] -> [Built-in Ethernet Port Setting]. More Details >>
- No：22735
- Release Date：2018/09/03 17:29
- Update：2018/09/21 17:22
- Category： MELSEC-L Series
Battery replacement for LCPU

The contents of the standard RAM and latch devices are not erased if the battery replacement is completed within three minutes, which is the backup power tim... More Details >>
- No：22733
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Use of an A-compatible 1E frame for the built-in Ethernet port of LCPU

The built-in Ethernet port in the L series is compatible only with a QnA-compatible 3E frame of the MC protocol. An A-compatible 1E frame is not supported. More Details >>
- No：22731
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Detecting the connection between a built-in Ethernet port QCPU and hub

You can check the connection to the hub with bit 10 of the special register SD1288. When bit 10 of the SD1288 is on, the QCPU is in connection with the hub. More Details >>
- No：22712
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to check the capacity of the file registers in use

The capacity file registers currently have can be checked in the file register setting section ([PLC Parameter] -> [PLC File] tab). More Details >>
- No：22694
- Release Date：2018/09/03 17:29
- Update：2018/09/21 14:19
- Category： MELSEC-Q Series
Cables connected to the Ethernet port on the universal model QCPU

If a direct connection is made, either type can be used.If making a connection via a hub, use a straight cable. More Details >>
- No：22690
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

881-890 of Total 1123

Inquiries

page top