You will need the EtherNet/IP Configuration Tool for FX5-ENET/IP. Download the tool from the FA site.

For a label where digits are to be specified, set a bit type array as its data type. The following shows an example of w

No connector is provided with the module. Separately prepare any of the following connectors. A6CON1: Soldering type 32-

Personal computers have different MAC addresses and an Ethernet module hold a MAC address. Hence the MAC address that th

The input method for statements, either "PLC" or "Peripheral", makes a difference. - If "PLC" is set for statements,

A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the sign

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by ins

The FX3G-1DA-BD (1-channel analog output extension board), FX3U-4DA-ADP (4-channel analog output special adapter), and F

The following restrictions apply to the external input/output forced ON/OFF function. ・Since RUN contact setting is RUN

Yes, as long as the capacity is expandable to the file register (R), it can be transmitted by using the file operation i

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

81-90 of Total 1110

prev 9 / 111page next

Regarding FX5-ENET/IP parameter settings

You will need the EtherNet/IP Configuration Tool for FX5-ENET/IP. Download the tool from the FA site. More Details >>
- No：39302
- Release Date：2023/01/12 16:53
- Category： MELSEC iQ-F Series , Network/Communication
Digit specification for bit devices in ST language with GX Works3

For a label where digits are to be specified, set a bit type array as its data type. The following shows an example of when a global label is used. - Globa... More Details >>
- No：22455
- Release Date：2018/09/03 17:28
- Update：2018/09/18 15:01
- Category： MELSEC iQ-R Series
Accessories of the MELSEC iQ-R series 40-pin connector type module

No connector is provided with the module. Separately prepare any of the following connectors. A6CON1: Soldering type 32-point connector (40-pin connector) A6... More Details >>
- No：22467
- Release Date：2018/09/03 17:28
- Category： MELSEC iQ-R Series
Ethernet communication after the replacement of an external device

Personal computers have different MAC addresses and an Ethernet module hold a MAC address. Hence the MAC address that the Ethernet module currently holds is ... More Details >>
- No：22665
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Statements of GX Works2 and the scan time

The input method for statements, either "PLC" or "Peripheral", makes a difference. - If "PLC" is set for statements, they are written into the program mem... More Details >>
- No：22856
- Release Date：2018/09/03 17:30
- Update：2018/09/22 14:18
- Category： Engineering Software
Terminating resistors for QJ71C24N

A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the signal instabilities. More Details >>
- No：22982
- Release Date：2018/09/03 17:31
- Category： Network related products
Latched (battery backed) area in the data register (D) of the FX3G/FX3GC series

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by installing an optional battery and setti... More Details >>
- No：24901
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Main Unit
Analog output modules that can be used in the FX3G series

The FX3G-1DA-BD (1-channel analog output extension board), FX3U-4DA-ADP (4-channel analog output special adapter), and FX3U-3A-ADP (2-channel analog input/1-... More Details >>
- No：24979
- Release Date：2019/04/23 07:20
- Category： MELSEC-F Series , Analog Control
Regarding restrictions on the external input/output forced ON/OFF function

The following restrictions apply to the external input/output forced ON/OFF function. ・Since RUN contact setting is RUN/STOP by external signal, forced ON/O... More Details >>
- No：44332
- Release Date：2024/03/20 12:58
- Category： MELSEC iQ-F Series , CPU Module
Regarding sending files in an SD Memory Card by Mail

Yes, as long as the capacity is expandable to the file register (R), it can be transmitted by using the file operation instruction. When sending, please set... More Details >>
- No：44369
- Release Date：2024/03/27 16:41
- Category： MELSEC iQ-F Series , Network/Communication

81-90 of Total 1110

Inquiries

page top