Maximum number of modules to be connected to L26CPU-(P)BT

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digits of the serial number are "13072" or... More Details >>

Support for Q series RS-232 cable

Yes. More Details >>

Use of commercial SD memory cards

Yes. A commercial SD memory card can be used. (32 GB max.)Connectable SD memory cards that passed our operation check are listed in the technical bulletin. More Details >>

How to obtain connectors used for L series connector type I/O modules

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2 (crimp connector, straight out type),... More Details >>

Alive check for built-in Ethernet port LCPU

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An alive check message is sent five seconds... More Details >>

Maximum number of connectable modules to LCPU when it is not extended

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit, RS232C adapter, and END cover. Some ... More Details >>

Use of 4E frame for built-in Ethernet port of LCPU

The built-in Ethernet port in the L series is compatible only with the QnA-compatible 3E frame. The 4E frame is not supported. More Details >>

How to use L series extension modules

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the branch module and the extension module... More Details >>

GX Developer's compatibility with 32-bit Windows 7

GX Developer Version 8.91V or later supports 32-bit Windows 7. More Details >>

Accessing file registers from the built-in Ethernet port QCPU using A-compatible 1E frames

The QnUDE(H)CPU modules with serial numbers with upper 5 digits of "14112" or later indicate compatibility with the function. The accessible device range is ... More Details >>