X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (B

Yes. Recommended products are listed in the technical bulletin FA-A-0078.

Set "(Last five digits of actual device number) - 1" for the Target MODBUS(R) device head number.Example) For the holdin

Use SP.FWRITE instruction to save the data to an ATA card in CSV format.For Q00UJCPU, Q00UCPU, and Q01UCPU, however, mem

Since the conversion efficiency of the power supply module is approximately 70%, and 30% of the output power is dissipat

You can set IP addresses accessible to the CPU module and prevent unauthorized access to the CPU module. <Setting th

The maximum number of stations that can be connected in the network depends on the model name of the MX-F model. ・MXF100

The built-in motion function of the MX-F Model is programmed using motion control FB, wheareas the FX5-40/80SSC-G of the

In the case of positioning control and OPR control, there are three ways to start positioning: (1)[cd. 184] Turn on the

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

971-980 of Total 1123

prev 98 / 113page next

Number of points used for I/O assignment of LCPU built-in I/O function

X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (Built-In I/O Function)". More Details >>
- No：22762
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Use of a commercial SD memory card in L series logging function

Yes. Recommended products are listed in the technical bulletin FA-A-0078.　 More Details >>
- No：22753
- Release Date：2018/09/03 17:29
- Update：2018/10/03 16:25
- Category： MELSEC-L Series
Setting of "Target MODBUS(R) device head number"

Set "(Last five digits of actual device number) - 1" for the Target MODBUS(R) device head number.Example) For the holding register 400018, set "17". More Details >>
- No：22682
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Writing files in CSV format

Use SP.FWRITE instruction to save the data to an ATA card in CSV format.For Q00UJCPU, Q00UCPU, and Q01UCPU, however, memory cards cannot be used thus data ca... More Details >>
- No：22652
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Heat generation of Q61P power supply module

Since the conversion efficiency of the power supply module is approximately 70%, and 30% of the output power is dissipated as heat, the power consumption is ... More Details >>
- No：22529
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
IP filter function of MELSEC iQ-R series CPU modules

You can set IP addresses accessible to the CPU module and prevent unauthorized access to the CPU module. <Setting the IP filter function> [Navigati... More Details >>
- No：22479
- Release Date：2018/09/03 17:28
- Update：2018/09/19 15:01
- Category： MELSEC iQ-R Series
Regarding maximum number of connected stations for built-in CC-Link IE TSN

The maximum number of stations that can be connected in the network depends on the model name of the MX-F model. ・MXF100-16 N32/P32: Up to 46 stations ・MXF... More Details >>
- No：44973
- Release Date：2025/05/08 09:08
- Update：2025/10/31 15:18
- Category： MELSEC MX Controller MX-F Model
Regarding the built-in motion function

The built-in motion function of the MX-F Model is programmed using motion control FB, wheareas the FX5-40/80SSC-G of the iQ-F series is programmed using buff... More Details >>
- No：44970
- Release Date：2025/06/18 14:38
- Category： MELSEC MX Controller MX-F Model
Regarding how to start positioning

In the case of positioning control and OPR control, there are three ways to start positioning: (1)[cd. 184] Turn on the positioning start signal. (2)Exec... More Details >>
- No：39360
- Release Date：2023/01/12 17:19
- Category： MELSEC iQ-F Series , Motion/Positioning
Extending the extension cable

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the parallel link or N:N Network functio... More Details >>
- No：24941
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Accessories

971-980 of Total 1123

Inquiries

page top