H3081 is caused by an analog ADP power failure and the analog ADP is not receiving power normally. The FX5-4A-ADP and FX

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the bo

You cannot use the ladder monitor with the Web server function. With the Web server function, it is possible to monitor

From GXWorks3, use [Online] -[CPU Memory Operation] to initialize. How to check the IP address is as follows. They are s

It represents the number of characters that can be written. By changing "(32)," you can write up to 255 characters.

It can be changed. For details, please refer to MELSEC iQ-F FX5 User's Manual (Positioning Control - CPU module built-in

The FX5-CNV-BUS is an additional cable type. ・Used when the FX5-CNV-BUS previous module is an expansion cable type modu

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the p

The connection cable is GT01-C30R4-8P. The FX5U CPU module does not have an RS422 port, so you will need to add an FX5-4

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. F

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

91-100 of Total 266

prev 10 / 27page next

Regarding analog ADP Power Supply abnormalities

H3081 is caused by an analog ADP power failure and the analog ADP is not receiving power normally. The FX5-4A-ADP and FX5-4DA-ADP are adapters that require p... More Details >>
- No：44346
- Release Date：2024/03/27 15:27
- Category： MELSEC iQ-F Series , Analog
Regarding Boot Operation procedures

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the boot configuration screen. 　 From the... More Details >>
- No：44348
- Release Date：2024/03/27 15:29
- Category： MELSEC iQ-F Series , CPU Module
Regarding whether ladder monitoring is enabled by the Web server function

You cannot use the ladder monitor with the Web server function. With the Web server function, it is possible to monitor the device value, test the device (w... More Details >>
- No：44873
- Release Date：2025/03/18 10:23
- Category： MELSEC iQ-F Series , CPU Module
Regarding initialization procedure

From GXWorks3, use [Online] -[CPU Memory Operation] to initialize. How to check the IP address is as follows. They are stored in special registers SD8492 a... More Details >>
- No：45481
- Release Date：2025/11/12 13:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding String Labels

It represents the number of characters that can be written. By changing "(32)," you can write up to 255 characters. More Details >>
- No：39353
- Release Date：2023/02/15 10:07
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding speed change of positioning operation.

It can be changed. For details, please refer to MELSEC iQ-F FX5 User's Manual (Positioning Control - CPU module built-in, high speed pulse input/output modu... More Details >>
- No：22299
- Release Date：2018/08/30 13:55
- Update：2023/02/14 09:52
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding Bus Conversion Module Differences

The FX5-CNV-BUS is an additional cable type. ・Used when the FX5-CNV-BUS previous module is an expansion cable type module. The FX5-CNV-BUSC is an a... More Details >>
- No：44353
- Release Date：2024/03/27 15:49
- Category： MELSEC iQ-F Series , CPU Module
Regrading using the Positioning Function with a Relay-Output Type FX5 CPU Module

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the positioning function can be used with ... More Details >>
- No：44366
- Release Date：2024/03/27 16:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding reuse of GOT connector cable when replacing with FX5 CPU module

The connection cable is GT01-C30R4-8P. The FX5U CPU module does not have an RS422 port, so you will need to add an FX5-422-BD-GOT. More Details >>
- No：44615
- Release Date：2024/11/28 16:13
- Category： MELSEC iQ-F Series , CPU Module
Regarding the settings of built-in analog function of FX5U CPU module

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. For further details please refer to M... More Details >>
- No：22314
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:20
- Category： MELSEC iQ-F Series , CPU Module , Analog

91-100 of Total 266

Inquiries

page top