The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.0

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S

Connection is not allowed. For FX5-CCL-MS, only remote I/O stations, remote device stations and intelligent device stati

The FX5-CNV-IF is an additional cable type. ・FX5U/FX5UJ CPU Modules are supported. ・Used to connect an extension connec

It represents the number of characters that can be written. By changing "(32)," you can write up to 255 characters.

When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The f

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

The data name shown in "red" means "unconverted data" or "unused data before conversion." Data name displayed in 'light

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numb

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

91-100 of Total 266

prev 10 / 27page next

Regarding multiple connections for the MQTT communication function

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT communication function has a maximum ... More Details >>
- No：44358
- Release Date：2024/03/27 16:02
- Category： MELSEC iQ-F Series , Network/Communication
Regarding clearing the maximum and minimum scan times

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.085 P or later or by special relays. More Details >>
- No：39342
- Release Date：2023/02/15 10:05
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding program execution using SD Memory Cards

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S CPU module, you need to install an a... More Details >>
- No：39311
- Release Date：2023/02/14 08:54
- Category： MELSEC iQ-F Series , Option , CPU Module
Regarding the connection configuration of FX5-CCL-MS

Connection is not allowed. For FX5-CCL-MS, only remote I/O stations, remote device stations andintelligent device stationscan be connected. More Details >>
- No：22316
- Release Date：2018/08/30 13:55
- Update：2023/07/03 17:19
- Category： MELSEC iQ-F Series , Network/Communication
Regarding connector conversion module differences

The FX5-CNV-IF is an additional cable type. ・FX5U/FX5UJ CPU Modules are supported. ・Used to connect an extension connector type module to an extension ca... More Details >>
- No：44351
- Release Date：2024/03/27 15:45
- Category： MELSEC iQ-F Series , CPU Module
Regarding String Labels

It represents the number of characters that can be written. By changing "(32)," you can write up to 255 characters. More Details >>
- No：39353
- Release Date：2023/02/15 10:07
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding number of CC-Link IE field network Basic connections

When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The following firmware versions are requi... More Details >>
- No：44652
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the text color of file names

The data name shown in "red" means "unconverted data" or "unused data before conversion." Data name displayed in 'light blue' means "unused". If a conversio... More Details >>
- No：39345
- Release Date：2023/02/15 10:06
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding instructions for converting constants from decimal to hexadecimal

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numbers of up to 8 digits can be converte... More Details >>
- No：44352
- Release Date：2024/03/27 15:43
- Category： MELSEC iQ-F Series , CPU Module

91-100 of Total 266

Inquiries

page top