By using the Time calculation FB library, you can perform calculations that across years, months and days. In the time

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

The FX5 CPU unit does not handle double-precision real numbers. Only single-precision real numbers can be handled.

You can open the descriptions for each instruction by moving the cursor to the target instruction and pressing F1. You c

It means an instruction that handles BIN 16 bit and BIN 32 bit unsigned data. Example:ADD _ U

It is possible by setting the scaling function or shift function from the parameter settings.

You can verify from GX Works3 Project - Verify with PLC. Manual GX Works3 Operating Manual

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU modul

FX5-CCLGN-MS allows the master station to change the reserved station setting with parameters, but the setting can not b

The execution time of the basic opeartion instruction (LD) of the FX5U/FX5UC/FX5UJ CPU module is 34 ns. *For firmware Ve

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

101-110 of Total 266

prev 11 / 27page next

Regarding timing across dates

By using the Time calculation FB library, you can perform calculations that across years, months and days. In the time calculation FB library, you can add an... More Details >>
- No：44362
- Release Date：2024/03/27 16:03
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding double-precision real numbers

The FX5 CPU unit does not handle double-precision real numbers. Only single-precision real numbers can be handled. More Details >>
- No：40033
- Release Date：2023/08/24 15:37
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding Instruction description help in GX Works3

You can open the descriptions for each instruction by moving the cursor to the target instruction and pressing F1. You can also hover the cursor over it and ... More Details >>
- No：39366
- Release Date：2023/02/15 13:06
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding "_ U" in Application Instruction

It means an instruction that handles BIN 16 bit and BIN 32 bit unsigned data. Example:ADD _ U More Details >>
- No：39295
- Release Date：2023/02/13 16:37
- Category： MELSEC iQ-F Series , CPU Module
Regarding the digital output of the built-in analog function

It is possible by setting the scaling function or shift function from the parameter settings. More Details >>
- No：22315
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:46
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding Project verification

You can verify from GX Works3 Project - Verify with PLC. Manual GX Works3 Operating Manual More Details >>
- No：40028
- Release Date：2023/08/24 14:39
- Category： MELSEC iQ-F Series , Engineering Software
Regarding error 2440H on CPU module when using FX5-CCLGN-MS

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU module is also notified of the error. Ther... More Details >>
- No：39282
- Release Date：2023/01/12 16:49
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the change of settings for reserved station (master station) of FX5-CCLGN-MS

FX5-CCLGN-MS allows the master station to change the reserved station setting with parameters, but the setting can not be changed by program. Note that link... More Details >>
- No：39275
- Release Date：2023/01/12 16:46
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the processing specification of the basic operation instruction(LD).

The execution time of the basic opeartion instruction (LD) of the FX5U/FX5UC/FX5UJ CPU module is 34 ns. *For firmware Ver.1.100 or above, this specification ... More Details >>
- No：22287
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:56
- Category： MELSEC iQ-F Series , CPU Module

101-110 of Total 266

Inquiries

page top