You can't put it on or take it off. The terminal block of the FX5S CPU module is a non-removable terminal block.

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP.

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. F

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC CP

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are tho

This function allows you to select the digital value to perform D/A conversion from the following three patterns dependi

From GXWorks3, use [Online] -[CPU Memory Operation] to initialize. How to check the IP address is as follows. They are s

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the p

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

111-120 of Total 266

prev 12 / 27page next

Regarding FX5S CPU module Terminal Block Removal

You can't put it on or take it off. The terminal block of the FX5S CPU module is a non-removable terminal block. More Details >>
- No：39334
- Release Date：2023/02/14 09:10
- Category： MELSEC iQ-F Series , CPU Module
Regarding EtherNet/IP Communications

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP. More Details >>
- No：39319
- Release Date：2023/02/14 08:57
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding Edge Relay

Not supported. More Details >>
- No：39305
- Release Date：2023/02/13 16:41
- Category： MELSEC iQ-F Series , CPU Module
Regarding the settings of built-in analog function of FX5U CPU module

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. For further details please refer to M... More Details >>
- No：22314
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:20
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding automatic transfer of Data Logging Files

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC CPU Module Ver. 1.300 or later ・FX5U... More Details >>
- No：44334
- Release Date：2024/03/20 13:30
- Category： MELSEC iQ-F Series , CPU Module
Regarding GX Works3 Module configuration diagram

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are those excluding FX5-CNV-IFC and FX3 Int... More Details >>
- No：39331
- Release Date：2023/02/14 09:08
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the HOLD/CLEAR function of the built-in analog output

This function allows you to select the digital value to perform D/A conversion from the following three patterns depending on the operating status of the CPU... More Details >>
- No：39289
- Release Date：2023/01/12 16:51
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding initialization procedure

From GXWorks3, use [Online] -[CPU Memory Operation] to initialize. How to check the IP address is as follows. They are stored in special registers SD8492 a... More Details >>
- No：45481
- Release Date：2025/11/12 13:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regrading using the Positioning Function with a Relay-Output Type FX5 CPU Module

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the positioning function can be used with ... More Details >>
- No：44366
- Release Date：2024/03/27 16:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

111-120 of Total 266

Inquiries

page top