You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

It is possible by setting the scaling function or shift function from the parameter settings.

From the GX Works3 settings when the optional battery is installed, it must be set to Installed in the Optional Batter

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supporte

Use the POW (Single Precision Real Power Operation) instruction.

The CANopen communication functions supported by the FX5-CCLGN-MS conform to the CiA402 CANopen profile, and can control

It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected.

LD instruction: 0.35 μs, MOV instruction: 0.779 μs. For other instructions, see the manual below. MELSEC iQ-F FX5 Progr

"Rebuild All" converts the entire project and "Convet" only coverts the modified part of the program.

It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

121-130 of Total 266

prev 13 / 27page next

Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the digital output of the built-in analog function

It is possible by setting the scaling function or shift function from the parameter settings. More Details >>
- No：22315
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:46
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding settings when the battery is installed

From the GX Works3 settings when the optional battery is installed, it must be set to Installed in the Optional Battery Settings. Use the following proc... More Details >>
- No：44363
- Release Date：2024/03/27 17:09
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>
- No：44330
- Release Date：2024/03/20 12:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding exponentiation

Use the POW (Single Precision Real Power Operation) instruction. More Details >>
- No：40029
- Release Date：2023/08/24 14:38
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding CC-Link IE TSN CANopen Communication function

The CANopen communication functions supported by the FX5-CCLGN-MS conform to the CiA402 CANopen profile, and can control devices that support the CiA402 devi... More Details >>
- No：44474
- Release Date：2024/07/02 19:07
- Category： MELSEC iQ-F Series , Network/Communication
Regarding remote I/O expansion for FX5S CPU module

It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected. More Details >>
- No：40041
- Release Date：2023/08/24 15:45
- Update：2025/03/13 10:08
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding Instruction processing time when the program capacity: 128 K steps are set

LD instruction: 0.35 μs, MOV instruction: 0.779 μs. For other instructions, see the manual below. MELSEC iQ-F FX5 Programming Manual (Instructions, Standa... More Details >>
- No：39362
- Release Date：2023/01/12 17:12
- Category： MELSEC iQ-F Series , CPU Module
Regarding program conversion

"Rebuild All" converts the entire project and "Convet" only coverts the modified part of the program. More Details >>
- No：22326
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:40
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding compatible version of CANopen communication function for PDO communication

It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/FX5UC CPU module ・・・1.260 or later ... More Details >>
- No：44473
- Release Date：2024/07/02 19:06
- Category： MELSEC iQ-F Series , Network/Communication

121-130 of Total 266

Inquiries

page top