The FX5 CPU module does not support UDP broadcast communication.

The sign is required in the VAL instruction and cannot be ignored.

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds

No, there is no function to resend all the data that could not be sent. By setting Retain and QoS from FB, it is possibl

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT

The input/output cables used in the FX3GC and FX3UC basic units can be diverted to the FX5UC CPU Module (connector type)

CC-Link IE field Network Basic communication interval can be set with special relay and special register. During debugg

The value of n can be set in SD414, and the range is from K1 to K32767. (Default value: K30) If n=K1, it is a 2-second c

Some buffer memory values are cleared when the power is turned off. Turn on the backup command before turning the power

The FX5 CPU modules allows you to add an expansion adapter without using a connector conversion adapter. Therefore, ther

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

161-170 of Total 266

prev 17 / 27page next

Regarding UDP communication

The FX5 CPU module does not support UDP broadcast communication. More Details >>
- No：22291
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:49
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding signs of VAL Instructions

The sign is required in the VAL instruction and cannot be ignored. More Details >>
- No：44609
- Release Date：2024/11/28 16:11
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding Selecting a mapping pattern for PDO communication

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds to the profile position mode (pp), ... More Details >>
- No：44477
- Release Date：2024/07/02 19:06
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the MQTT communication function retransmission function

No, there is no function to resend all the data that could not be sent. By setting Retain and QoS from FB, it is possible to resend only the latest message. More Details >>
- No：44368
- Release Date：2024/03/27 16:56
- Category： MELSEC iQ-F Series , Network/Communication
Regarding multiple connections for the MQTT communication function

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT communication function has a maximum ... More Details >>
- No：44358
- Release Date：2024/03/27 16:02
- Category： MELSEC iQ-F Series , Network/Communication
Regarding using the connector of the CPU Module

The input/output cables used in the FX3GC and FX3UC basic units can be diverted to the FX5UC CPU Module (connector type). More Details >>
- No：44350
- Release Date：2024/03/27 15:44
- Category： MELSEC iQ-F Series , CPU Module
Regarding write speed during RUN

CC-Link IE field Network Basic communication interval can be set with special relay and special register. During debugging, adjust the communication interv... More Details >>
- No：44342
- Release Date：2024/03/20 13:39
- Category： MELSEC iQ-F Series , CPU Module
Regarding using the 2nsec Clock Timer

The value of n can be set in SD414, and the range is from K1 to K32767. (Default value: K30) If n=K1, it is a 2-second clock timer with 1 second ON/1 second... More Details >>
- No：40019
- Release Date：2023/08/24 14:29
- Category： MELSEC iQ-F Series , CPU Module
Regarding how to back up FX5-4LC

Some buffer memory values are cleared when the power is turned off. Turn on the backup command before turning the power OFF. By turning the buffer memory ... More Details >>
- No：39347
- Release Date：2023/01/16 10:07
- Category： MELSEC iQ-F Series , Analog
Regarding Recommended Substitute Models for FX3G-CNV-ADP

The FX5 CPU modules allows you to add an expansion adapter without using a connector conversion adapter. Therefore, there is no Recommended Substitute Models... More Details >>
- No：44875
- Release Date：2025/03/18 10:27
- Category： MELSEC iQ-F Series , CPU Module

161-170 of Total 266

Inquiries

page top