When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earli

The difference between the current address (user unit) and the current address (pulse unit) is as follows: The current a

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register.

To update to firmware version “1.100 ” or higher, you need a product with serial number (S/N) or higher listed below. ・F

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the p

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan inf

When a coil of the high-speed counter or an interrupt pointer is programmed, the programmable controller system adjusts

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.0

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, wr

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

171-180 of Total 266

prev 18 / 27page next

Regarding handling multiple executions of ADPRW Instructions

When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earlier is completed and communication by ... More Details >>
- No：39354
- Release Date：2023/02/15 10:17
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the difference of current address (user unit, pulse unit)

The difference between the current address (user unit) and the current address (pulse unit) is as follows: The current address (user unit) becomes the unit ... More Details >>
- No：39357
- Release Date：2023/02/15 13:05
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding registering profiles

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register. More Details >>
- No：44360
- Release Date：2024/03/27 16:01
- Category： MELSEC iQ-F Series , Engineering Software
Regarding updating the FX5U/FX5UC CPU module to firmware version “1.100 ” or later

To update to firmware version “1.100 ” or higher, you need a product with serial number (S/N) or higher listed below. ・FX5UC-32MT/DS-TS and FX5UC-32MT/DSS-T... More Details >>
- No：44623
- Release Date：2024/11/28 16:14
- Category： MELSEC iQ-F Series , CPU Module
Regrading using the Positioning Function with a Relay-Output Type FX5 CPU Module

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the positioning function can be used with ... More Details >>
- No：44366
- Release Date：2024/03/27 16:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the method to check the scan time

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan information 　SD520　Current scan time (... More Details >>
- No：22289
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:20
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Input filter adjustment when a high-speed counter or the interrupt function is used

When a coil of the high-speed counter or an interrupt pointer is programmed, the programmable controller system adjusts the filter constant of the correspond... More Details >>
- No：24867
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , High-Speed Counter
Regarding clearing the maximum and minimum scan times

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.085 P or later or by special relays. More Details >>
- No：39342
- Release Date：2023/02/15 10:05
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding changing the current address (user unit, pulse unit)

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, writing is disabled during positioning... More Details >>
- No：39356
- Release Date：2023/02/15 13:03
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

171-180 of Total 266

Inquiries

page top