The latch range can be set arbitrarily by the customer. The settings can be found in the memory/device settings of CPU p

To update to firmware version “1.100 ” or higher, you need a product with serial number (S/N) or higher listed below. ・F

CC-Link IE field When a network such as Network Basic is interrupted, the CPU module does not stop and continues to run.

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX

The FX5-2HC/ES must be connected to the eighth module from the power supply module (CPU Module, expansion power supply m

The following restrictions apply to the external input/output forced ON/OFF function. ・Since RUN contact setting is RUN/

The following points are different for the iQ-F series. ・All output disabled flag (SM8034) When SM8034 is ON, the all ou

Supported since GX Works3 Ver. 1.095Z, you can edit device comments from the device usage list.

Use the POW (Single Precision Real Power Operation) instruction.

In the case of positioning control and OPR control, there are three ways to start positioning: (1)[cd. 184] Turn on the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

171-180 of Total 266

prev 18 / 27page next

Regarding the range of latch devices

The latch range can be set arbitrarily by the customer. The settings can be found in the memory/device settings of CPU parameters. To back up the link regist... More Details >>
- No：22297
- Release Date：2018/08/30 13:55
- Category： MELSEC iQ-F Series , CPU Module
Regarding updating the FX5U/FX5UC CPU module to firmware version “1.100 ” or later

To update to firmware version “1.100 ” or higher, you need a product with serial number (S/N) or higher listed below. ・FX5UC-32MT/DS-TS and FX5UC-32MT/DSS-T... More Details >>
- No：44623
- Release Date：2024/11/28 16:14
- Category： MELSEC iQ-F Series , CPU Module
Regarding CC-Link IE field CPU module status during communication error occurs on CC-Link IE Field Network Basic

CC-Link IE field When a network such as Network Basic is interrupted, the CPU module does not stop and continues to run. When the CC-Link IE Field Network i... More Details >>
- No：44611
- Release Date：2024/11/28 16:11
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding program conversion from FX3 Series to iQ-F Series

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX Works3 Projects > Open Other Forma... More Details >>
- No：44349
- Release Date：2024/03/27 15:31
- Category： MELSEC iQ-F Series , CPU Module
Regarding FX5-2HC/ES restrictions

The FX5-2HC/ES must be connected to the eighth module from the power supply module (CPU Module, expansion power supply module, built-in power supply I/O Modu... More Details >>
- No：44339
- Release Date：2024/03/20 13:25
- Category： MELSEC iQ-F Series , High-Speed Counter
Regarding restrictions on the external input/output forced ON/OFF function

The following restrictions apply to the external input/output forced ON/OFF function. ・Since RUN contact setting is RUN/STOP by external signal, forced ON/O... More Details >>
- No：44332
- Release Date：2024/03/20 12:58
- Category： MELSEC iQ-F Series , CPU Module
Regarding specifications of the forced ON/OFF function for external input/output

The following points are different for the iQ-F series. ・All output disabled flag (SM8034) When SM8034 is ON, the all output disabled flag is given priorit... More Details >>
- No：44331
- Release Date：2024/03/20 12:54
- Category： MELSEC iQ-F Series , CPU Module
Regarding editing device comments in the device usage list

Supported since GX Works3 Ver. 1.095Z, you can edit device comments from the device usage list. More Details >>
- No：40038
- Release Date：2023/08/24 15:44
- Category： MELSEC iQ-F Series , Engineering Software
Regarding exponentiation

Use the POW (Single Precision Real Power Operation) instruction. More Details >>
- No：40029
- Release Date：2023/08/24 14:38
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding how to start positioning

In the case of positioning control and OPR control, there are three ways to start positioning: (1)[cd. 184] Turn on the positioning start signal. (2)Exec... More Details >>
- No：39360
- Release Date：2023/01/12 17:19
- Category： MELSEC iQ-F Series , Motion/Positioning

171-180 of Total 266

Inquiries

page top