There is no dedicated instruction to drive JOG. Use PLSV (variable speed operation) when operating JOG.

The functions supported only by the FX5U/FX5UC CPU Modules are listed below. ・Predefined Protocol Support Function For P

The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field n

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in

You can open the descriptions for each instruction by moving the cursor to the target instruction and pressing F1. You c

You will need the EtherNet/IP Configuration Tool for FX5-ENET/IP. Download the tool from the FA site.

It can be changed. For example, with the positioning instruction, a word device can be assigned to the operand which spe

The Auto refresh function is supported.

This is possible with the Guidance flow function. On GX Works3, you can view the setting procedure for the function you

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

191-200 of Total 266

prev 20 / 27page next

Regarding dedicated instruction for JOG operation

There is no dedicated instruction to drive JOG. Use PLSV (variable speed operation) when operating JOG. More Details >>
- No：44355
- Release Date：2024/03/27 15:50
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding FX5U/FX5UC CPU Module Built-in functions

The functions supported only by the FX5U/FX5UC CPU Modules are listed below. ・Predefined Protocol Support Function For Positioning function ・Optional batte... More Details >>
- No：40046
- Release Date：2023/08/24 16:14
- Update：2024/11/11 14:29
- Category： MELSEC iQ-F Series , CPU Module
Regarding the simultaneous use of Simple CPU Communication and FX5-CCLGN-MS MELSOFT Connection

Can be used simultaneously. More Details >>
- No：39285
- Release Date：2023/01/12 16:50
- Category： MELSEC iQ-F Series , Network/Communication
Regarding CC-Link IE field network support of FX5 CPU module built-in Ethernet

The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field network, add an FX5-CCLIEF. *The FX5-... More Details >>
- No：44877
- Release Date：2025/03/18 10:30
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding sending emails

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in the following versions. ・Hardware s... More Details >>
- No：40035
- Release Date：2023/08/24 15:40
- Update：2023/08/25 11:34
- Category： MELSEC iQ-F Series , Network/Communication
Regarding Instruction description help in GX Works3

You can open the descriptions for each instruction by moving the cursor to the target instruction and pressing F1. You can also hover the cursor over it and ... More Details >>
- No：39366
- Release Date：2023/02/15 13:06
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding FX5-ENET/IP parameter settings

You will need the EtherNet/IP Configuration Tool for FX5-ENET/IP. Download the tool from the FA site. More Details >>
- No：39302
- Release Date：2023/01/12 16:53
- Category： MELSEC iQ-F Series , Network/Communication
Regarding address change of positioning operation.

It can be changed. For example, with the positioning instruction, a word device can be assigned to the operand which specifies the positioning address and t... More Details >>
- No：22298
- Release Date：2018/08/30 13:55
- Update：2023/02/14 09:53
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding support for the FX5-EIP Auto refresh function

The Auto refresh function is supported. More Details >>
- No：45488
- Release Date：2025/11/12 13:55
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the procedure for functions set in GX Works3

This is possible with the Guidance flow function. On GX Works3, you can view the setting procedure for the function you want to use. *It is supported by GX ... More Details >>
- No：39341
- Release Date：2023/02/14 17:29
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software

191-200 of Total 266

Inquiries

page top