In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supporte

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

The FX5U CPU module has a lineup of up to 80 point. The following configuration is recommended when replacing the FX3U-

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versi

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast"

The date of manufacture of a product can be confirmed by the following methods. ① Name plate verification There is a n

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project an

For issuance of a certificate, please consult your local Mitsubishi representative.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

211-220 of Total 253

prev 22 / 26page next

Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding sending emails

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in the following versions. ・Hardware s... More Details >>
- No：40035
- Release Date：2023/08/24 15:40
- Update：2023/08/25 11:34
- Category： MELSEC iQ-F Series , Network/Communication
Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>
- No：44330
- Release Date：2024/03/20 12:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding replacement from 128 point type of FX3U

The FX5U CPU module has a lineup of up to 80 point. The following configuration is recommended when replacing the FX3U-128MR/ES. Recommended alternative (1... More Details >>
- No：44617
- Release Date：2024/11/28 16:13
- Category： MELSEC iQ-F Series , CPU Module
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding Control response parameter of built-in PID Control of CPU Module

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast". The difference is as follows. (1)W... More Details >>
- No：44653
- Release Date：2025/03/18 10:23
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding how to check the date of manufacture

The date of manufacture of a product can be confirmed by the following methods. ① Name plate verification There is a name plate on the right side of the pr... More Details >>
- No：44878
- Release Date：2025/03/18 11:11
- Category： MELSEC iQ-F Series , CPU Module
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the Certificate of non-applicability to export to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22301
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:15
- Category： MELSEC iQ-F Series , Option , CPU Module , I/O Module , Engineering Software , Network/Communication , Motion/Positioning , High-Speed Counter , Analog

211-220 of Total 253

Inquiries

page top