When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device).

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan inf

To rewrite the current value, arbitrary values can be written using the DHCMOV instruction. (Example) Set the current v

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device.

While the module configuration window is being displayed, the I/O assignment can be checked by selecting the following o

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

When used as a master station, communication with a slave station can be performed using the simple CPU communication or

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings c

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization."

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

231-240 of Total 266

prev 24 / 27page next

Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding CC-Link settings using GX Works3

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device). However, when connecting with FX3U-1... More Details >>
- No：22317
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
Regarding the method to check the scan time

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan information 　SD520　Current scan time (... More Details >>
- No：22289
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:20
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding changing the current value of the high-speed counter.

To rewrite the current value, arbitrary values can be written using the DHCMOV instruction. (Example) Set the current value of the high-speed counter ch1 ... More Details >>
- No：22303
- Release Date：2018/08/30 13:55
- Update：2023/02/06 17:05
- Category： MELSEC iQ-F Series , CPU Module , High-Speed Counter
Regarding the function of a special relay.

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device. More Details >>
- No：22288
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:09
- Category： MELSEC iQ-F Series , CPU Module
Regarding I/O assignment on the module configuration diagram of GX Works3

While the module configuration window is being displayed, the I/O assignment can be checked by selecting the following options from the menu bar: [Edit]→[X... More Details >>
- No：22307
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:25
- Category： CPU Module , I/O Module , Engineering Software
Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding MODBUS/TCP communication of the built-in Ethernet port

When used as a master station, communication with a slave station can be performed using the simple CPU communication or the predefined protocol support func... More Details >>
- No：22302
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:52
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding expansion of communication ports

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings can be set from GX Works3 parameters. More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2025/11/11 14:20
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding how to format an SD memory card

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization." More Details >>
- No：39344
- Release Date：2023/02/15 10:03
- Category： MELSEC iQ-F Series , Option , CPU Module , Engineering Software

231-240 of Total 266

Inquiries

page top