When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU

The iQ-F series does not support domain specification, so specify the IP address.

(1)Whether or not networks can be mixed on the same trunk line is different. CC-Link IE TSN allows network mixing on the

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device.

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device).

FX5U/FX5UC/FX5UJ CPU modules cannot perform firmware update using GX Works3. Use the SD memory card to update the firmwa

GX Works3 version 1.085P or later is compatible with Windows11.

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagno

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

251-260 of Total 266

prev 26 / 27page next

Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding how to clear simple CPU communication function errors

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU Communication Diagnostic" in GX Work... More Details >>
- No：40049
- Release Date：2023/08/25 09:06
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Reagrding specifying an FTP client domain

The iQ-F series does not support domain specification, so specify the IP address. More Details >>
- No：44359
- Release Date：2024/03/27 15:58
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the differences between CC-Link IE TSN and CC-Link IE Field Networks

(1)Whether or not networks can be mixed on the same trunk line is different. CC-Link IE TSN allows network mixing on the same trunk line. When using a CC-Li... More Details >>
- No：39359
- Release Date：2023/01/12 17:10
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the function of a special relay.

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device. More Details >>
- No：22288
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:09
- Category： MELSEC iQ-F Series , CPU Module
Regarding CC-Link settings using GX Works3

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device). However, when connecting with FX3U-1... More Details >>
- No：22317
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
Regarding how to update the firmware of the FX5 CPU module

FX5U/FX5UC/FX5UJ CPU modules cannot perform firmware update using GX Works3. Use the SD memory card to update the firmware. However, the FX5S CPU module sup... More Details >>
- No：39325
- Release Date：2023/02/14 09:03
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding GX Works3 for Windows11

GX Works3 version 1.085P or lateris compatible with Windows11. More Details >>
- No：40025
- Release Date：2023/08/24 14:36
- Category： MELSEC iQ-F Series , Engineering Software
Regarding how to check MAC Addresses

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagnostics) of GX Works3. More Details >>
- No：39294
- Release Date：2023/02/13 15:37
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

251-260 of Total 266

Inquiries

page top