The line-up of input and output points of the FX5S CPU module is as follows. ・30 points (Input: 16 points, Output: 14 p

It is possible to change the number of counts for count averaging in a program. Set the module parameter Basic settings

The CC‐Link cables are being produced by various manufacturers, and no specific cable model is recommended. Please use

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU modul

Yes, you can use MQTT communication function even in the local network by preparing a personal computer with MQTT broker

The batch setting of PDO mapping sets the default PDO mapping for all device stations that support PDO mapping. *Note t

No, there is no function to resend all the data that could not be sent. By setting Retain and QoS from FB, it is possib

The latch range can be set arbitrarily by the customer. The settings can be found in the memory/device settings of CPU p

When a coil of the high-speed counter or an interrupt pointer is programmed, the programmable controller system adjusts

Since the FX5-CCL-MS has a link refresh setting, there is no need for a program to read and write data to each station.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

31-40 of Total 253

prev 4 / 26page next

Regarding the FX5S CPU Module Line-up

The line-up of input and output points of the FX5S CPU module is as follows. ・30 points (Input: 16 points, Output: 14 points) ・40 points (Input: 24 points,... More Details >>
- No：39340
- Release Date：2023/02/14 17:28
- Category： MELSEC iQ-F Series , CPU Module
Regarding how to change the averaging processing of FX5-4AD-ADP programmatically

It is possible to change the number of counts for count averaging in a program. Set the module parameter Basic settings to "Set A/D conversion method" to Di... More Details >>
- No：44618
- Release Date：2024/11/28 16:13
- Category： MELSEC iQ-F Series , Analog
Regarding model name of CC-Link cables

The CC‐Link cables are being produced by various manufacturers, and no specific cable model is recommended. Please use a cable certified by the CC-Link Asso... More Details >>
- No：22330
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:53
- Category： MELSEC iQ-F Series , Network/Communication
Regarding error 2440H on CPU module when using FX5-CCLGN-MS

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU module is also notified of the error. Ther... More Details >>
- No：39282
- Release Date：2023/01/12 16:49
- Category： MELSEC iQ-F Series , Network/Communication
Regarding using the MQTT Communication function in a local environment

Yes, you can use MQTT communication function even in the local network by preparing a personal computer with MQTT broker such as Eclipse Mosquitto installed.... More Details >>
- No：44367
- Release Date：2024/03/27 16:46
- Category： MELSEC iQ-F Series , Network/Communication
Regarding understanding the difference between "Batch Setting of PDO Mapping" and "PDO Mapping Setting".

The batch setting of PDO mapping sets the default PDO mapping for all device stations that support PDO mapping. *Note that in the batch setting of PDO mappi... More Details >>
- No：44476
- Release Date：2024/07/02 19:06
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the MQTT communication function retransmission function

No, there is no function to resend all the data that could not be sent. By setting Retain and QoS from FB, it is possible to resend only the latest message. More Details >>
- No：44368
- Release Date：2024/03/27 16:56
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the range of latch devices

The latch range can be set arbitrarily by the customer. The settings can be found in the memory/device settings of CPU parameters. To back up the link regist... More Details >>
- No：22297
- Release Date：2018/08/30 13:55
- Category： MELSEC iQ-F Series , CPU Module
Input filter adjustment when a high-speed counter or the interrupt function is used

When a coil of the high-speed counter or an interrupt pointer is programmed, the programmable controller system adjusts the filter constant of the correspond... More Details >>
- No：24867
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , High-Speed Counter
Regarding the data link program of FX5-CCL-MS

Since the FX5-CCL-MS has a link refresh setting, there is no need for a program to read and write data to each station. More Details >>
- No：44614
- Release Date：2024/11/28 16:12
- Category： MELSEC iQ-F Series , Network/Communication

31-40 of Total 253

Inquiries

page top