High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the p

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the b

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details.

The maximum number of connections for the simple CPU communication function of FX5 CPU module is 16 for FX5U/FX5UC CPU m

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.0

It can be added in conjunction with an expansion board. For details on how to connect, refer to the following manual.

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatibl

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

41-50 of Total 226

prev 5 / 23page next

Regrading using the Positioning Function with a Relay-Output Type FX5 CPU Module

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the positioning function can be used with ... More Details >>
- No：44366
- Release Date：2024/03/27 16:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding Boot Operation procedures

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the boot configuration screen. 　 From the... More Details >>
- No：44348
- Release Date：2024/03/27 15:29
- Category： MELSEC iQ-F Series , CPU Module
Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding MELSOFT Products that do not work correctly

If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details. Notes on using the Japanese Input M... More Details >>
- No：40048
- Release Date：2023/08/24 16:32
- Category： MELSEC iQ-F Series , Engineering Software
Regarding maximum number of connections for the simple CPU communication function

The maximum number of connections for the simple CPU communication function of FX5 CPU module is 16 for FX5U/FX5UC CPU module and 8 for FX5UJ/FX5S CPU module... More Details >>
- No：40032
- Release Date：2023/08/24 15:37
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding Data Register Byte Splitting

Use the WTOB instruction. More Details >>
- No：40022
- Release Date：2023/08/24 14:32
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding clearing the maximum and minimum scan times

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.085 P or later or by special relays. More Details >>
- No：39342
- Release Date：2023/02/15 10:05
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding connection of SD Memory Card module: FX5-SDCD

It can be added in conjunction with an expansion board. For details on how to connect, refer to the following manual. MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC Use... More Details >>
- No：39337
- Release Date：2023/02/14 17:27
- Category： MELSEC iQ-F Series , Option , CPU Module
Regarding the supported version of the simple CPU communication function

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible from the first one. More Details >>
- No：39316
- Release Date：2023/02/14 08:56
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

41-50 of Total 226

Inquiries

page top