The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field n

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. F

To rewrite the current value, arbitrary values can be written using the DHCMOV instruction. (Example) Set the current v

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in

The digital output value is a digital value obtained by performing sampling processing or various average processing on

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

You can't. Device allocation for refresh settings is sequential only.

32 stations can be connected when RS-485 port is used and only 1 station can be connected when RS-232 port is used.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

61-70 of Total 266

prev 7 / 27page next

Regarding CC-Link IE field network support of FX5 CPU module built-in Ethernet

The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field network, add an FX5-CCLIEF. *The FX5-... More Details >>
- No：44877
- Release Date：2025/03/18 10:30
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the supported version of the simple CPU communication function

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible from the first one. More Details >>
- No：39316
- Release Date：2023/02/14 08:56
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the settings of built-in analog function of FX5U CPU module

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. For further details please refer to M... More Details >>
- No：22314
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:20
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding changing the current value of the high-speed counter.

To rewrite the current value, arbitrary values can be written using the DHCMOV instruction. (Example) Set the current value of the high-speed counter ch1 ... More Details >>
- No：22303
- Release Date：2018/08/30 13:55
- Update：2023/02/06 17:05
- Category： MELSEC iQ-F Series , CPU Module , High-Speed Counter
Regarding program conversion from FX3 Series to iQ-F Series

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX Works3 Projects > Open Other Forma... More Details >>
- No：44349
- Release Date：2024/03/27 15:31
- Category： MELSEC iQ-F Series , CPU Module
Regarding sending emails

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in the following versions. ・Hardware s... More Details >>
- No：40035
- Release Date：2023/08/24 15:40
- Update：2023/08/25 11:34
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the difference between digital output values and digital operation values

The digital output value is a digital value obtained by performing sampling processing or various average processing on the A/D converted digital value. Dig... More Details >>
- No：39307
- Release Date：2023/02/13 16:43
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding CC-Link IE Field Network Basic Refresh Settings

You can't. Device allocation for refresh settings is sequential only. More Details >>
- No：39306
- Release Date：2023/02/13 16:41
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the maximum number of connections for MODBUS communication

32 stations can be connected when RS-485 port is used and only 1 station can be connected when RS-232 port is used. More Details >>
- No：22324
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:49
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

61-70 of Total 266

Inquiries

page top