A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

The FX5 CPU module supports SFC language with the following firmware versions. ・FX5U/FX5UC Ver. 1.220 or later ・FX5UJ Ve

The FX5 CPU module does not support UDP broadcast communication.

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX

Use the POW (Single Precision Real Power Operation) instruction.

It does not turn OFF automatically. Use the RST command in the program to turn it OFF.

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

This function allows you to select the digital value to perform D/A conversion from the following three patterns dependi

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versio

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

81-90 of Total 266

prev 9 / 27page next

Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding SFC Language Support

The FX5 CPU module supports SFC language with the following firmware versions. ・FX5U/FX5UC Ver. 1.220 or later ・FX5UJ Ver. 1.050 or later ・FX5S Ver. 1.010... More Details >>
- No：40043
- Release Date：2023/08/24 15:47
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding UDP communication

The FX5 CPU module does not support UDP broadcast communication. More Details >>
- No：22291
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:49
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding program conversion from FX3 Series to iQ-F Series

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX Works3 Projects > Open Other Forma... More Details >>
- No：44349
- Release Date：2024/03/27 15:31
- Category： MELSEC iQ-F Series , CPU Module
Regarding exponentiation

Use the POW (Single Precision Real Power Operation) instruction. More Details >>
- No：40029
- Release Date：2023/08/24 14:38
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the communication execution status output device for ADPRW instructions

It does not turn OFF automatically. Use the RST command in the program to turn it OFF. More Details >>
- No：39349
- Release Date：2023/02/15 10:07
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the HOLD/CLEAR function of the built-in analog output

This function allows you to select the digital value to perform D/A conversion from the following three patterns depending on the operating status of the CPU... More Details >>
- No：39289
- Release Date：2023/01/12 16:51
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding registering profiles

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register. More Details >>
- No：44360
- Release Date：2024/03/27 16:01
- Category： MELSEC iQ-F Series , Engineering Software

81-90 of Total 266

Inquiries

page top