You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagno

The default IP address (factory default value) of FX5 CPU modules is 192.168.3.250.

The IP address can be changed from a program by using the IP address change function. The IP address change function ca

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Paramete

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization."

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor &gt

FX5U/FX5UC/FX5UJ CPU modules cannot perform firmware update using GX Works3. Use the SD memory card to update the firmwa

From the PC's Internet Protocol Version 4 Properties, uncheck "Obtain an IP address automatically" option and set an ar

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

1-10 of Total 226

prev 1 / 23page next

Regarding how to check MAC Addresses

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagnostics) of GX Works3. More Details >>
- No：39294
- Release Date：2023/02/13 15:37
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the default IP address

The default IP address (factory default value) of FX5CPU modules is 192.168.3.250. More Details >>
- No：22290
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:33
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding how to change the IP address

The IP address can be changed from a program by using the IP address change function. The IP address change function can change the IP address, subnet mask,... More Details >>
- No：39332
- Release Date：2023/02/14 09:09
- Update：2024/08/19 09:52
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the latch settings of data register

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameters] -> [Device/Memory Settings] -&... More Details >>
- No：22329
- Release Date：2018/08/30 13:55
- Update：2024/11/11 13:49
- Category： CPU Module , Engineering Software
Regarding EtherCAT Communications

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that support EtherCAT communication. More Details >>
- No：39313
- Release Date：2023/02/14 08:54
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding how to format an SD memory card

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization." More Details >>
- No：39344
- Release Date：2023/02/15 10:03
- Category： MELSEC iQ-F Series , Option , CPU Module , Engineering Software
Regarding how to Monitor Buffer Memory Values

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor > Common Item > Monitor Buffer Mem... More Details >>
- No：39324
- Release Date：2023/01/12 16:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding how to update the firmware of the FX5 CPU module

FX5U/FX5UC/FX5UJ CPU modules cannot perform firmware update using GX Works3. Use the SD memory card to update the firmware. However, the FX5S CPU module sup... More Details >>
- No：39325
- Release Date：2023/02/14 09:03
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the cause of communication error with GX Works3

From the PC's Internet Protocol Version 4 Properties, uncheck "Obtain an IP address automatically" option and set an arbitrary IP adress that does not dupli... More Details >>
- No：22319
- Release Date：2018/08/30 13:55
- Update：2023/02/13 11:38
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding FX5 CPU Module clock settings

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX Works3 　(1) In GX Works3, select On... More Details >>
- No：44365
- Release Date：2024/03/27 17:01
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software

1-10 of Total 226

Inquiries

page top