This function allows you to select the digital value to perform D/A conversion from the following three patterns dependi

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later support

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versio

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are tho

SD Memory Card Module: FX5-SDCD is required for the following functions. ・Firmware update function ※ 1 ・Memory card fun

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supporte

It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected.

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

It is possible by setting the scaling function or shift function from the parameter settings.

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the bo

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

101-110 of Total 185

prev 11 / 19page next

Regarding the HOLD/CLEAR function of the built-in analog output

This function allows you to select the digital value to perform D/A conversion from the following three patterns depending on the operating status of the CPU... More Details >>
- No：39289
- Release Date：2023/01/12 16:51
Regarding communication with MX Component

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later supports the FX5S CPU module. Also, both se... More Details >>
- No：22328
- Release Date：2018/08/30 13:55
- Update：2023/02/15 13:07
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
Regarding GX Works3 Module configuration diagram

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are those excluding FX5-CNV-IFC and FX3 Int... More Details >>
- No：39331
- Release Date：2023/02/14 09:08
Regarding the requirement of SD Memory Card module function of FX5S CPU module

SD Memory Card Module: FX5-SDCD is required for the following functions. ・Firmware update function ※ 1 ・Memory card function (SD memory card forced stop,... More Details >>
- No：39338
- Release Date：2023/02/14 17:29
Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>
- No：44330
- Release Date：2024/03/20 12:56
Regarding remote I/O expansion for FX5S CPU module

It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected. More Details >>
- No：40041
- Release Date：2023/08/24 15:45
- Update：2025/03/13 10:08
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
Regarding the digital output of the built-in analog function

It is possible by setting the scaling function or shift function from the parameter settings. More Details >>
- No：22315
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:46
Regarding Boot Operation procedures

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the boot configuration screen. 　 From the... More Details >>
- No：44348
- Release Date：2024/03/27 15:29

101-110 of Total 185

Inquiries

page top