It is possible to use the MODBUS serial communication with multiple channels. However, only 1 channel can be set as the

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers.

By using the Time calculation FB library, you can perform calculations that across years, months and days. In the time

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

The FX5-CNV-IF is an additional cable type. ・FX5U/FX5UJ CPU Modules are supported. ・Used to connect an extension con

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX

Be careful when using the FTP server auto transfer function in combination with the following functions. ・FTP client (F

The following points are different for the iQ-F series. ・Error History If the FX5 CPU Module is turned off, the error

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC

The following restrictions apply to the external input/output forced ON/OFF function. ・Since RUN contact setting is RUN

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

121-130 of Total 158

prev 13 / 16page next

Regarding expansion of communication ports

It is possible to use the MODBUS serial communication with multiple channels. However, only 1 channel can be set as the master. The MODBUS serial communica... More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:04
Regarding the settings of built-in analog function of FX5U CPU module

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. For further details please refer to M... More Details >>
- No：22314
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:20
Regarding timing across dates

By using the Time calculation FB library, you can perform calculations that across years, months and days. In the time calculation FB library, you can add an... More Details >>
- No：44362
- Release Date：2024/03/27 16:03
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
Regarding connector conversion module differences

The FX5-CNV-IF is an additional cable type. ・FX5U/FX5UJ CPU Modules are supported. ・Used to connect an extension connector type module to an extension ca... More Details >>
- No：44351
- Release Date：2024/03/27 15:45
Regarding program conversion from FX3 Series to iQ-F Series

You can convert an FX3 series project (extension.gxw) to an iQ-F series project by selecting and opening it from the GX Works3 Projects > Open Other Forma... More Details >>
- No：44349
- Release Date：2024/03/27 15:31
Regarding use of the FTP Server Auto Transfer Function with Other Functions

Be careful when using the FTP server auto transfer function in combination with the following functions. ・FTP client (FTPPUT instruction) 　The function exe... More Details >>
- No：44336
- Release Date：2024/03/20 13:28
Regarding differences in specifications of the FTP server auto transfer function for data logging files

The following points are different for the iQ-F series. ・Error History 　If the FX5 CPU Module is turned off, the error history is cleared. ・Setting detail... More Details >>
- No：44335
- Release Date：2024/03/20 13:21
Regarding automatic transfer of Data Logging Files

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC CPU Module Ver. 1.300 or later ・FX5U... More Details >>
- No：44334
- Release Date：2024/03/20 13:30
Regarding restrictions on the external input/output forced ON/OFF function

The following restrictions apply to the external input/output forced ON/OFF function. ・Since RUN contact setting is RUN/STOP by external signal, forced ON/O... More Details >>
- No：44332
- Release Date：2024/03/20 12:58

121-130 of Total 158

Inquiries

page top