CC-Link IE field When a network such as Network Basic is interrupted, the CPU module does not stop and continues to run.

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When co

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast"

You cannot. The expansion adapters does not support reading sample comments.

While the module configuration window is being displayed, the I/O assignment can be checked by selecting the following

The current value of the high-speed counter is retained and will not be cleared.

FX5U/FX5UC/FX5UJ CPU modules cannot perform firmware update using GX Works3. Use the SD memory card to update the firmwa

There is no dedicated instruction to drive JOG. Use PLSV (variable speed operation) when operating JOG.

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versi

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

121-130 of Total 179

prev 13 / 18page next

Regarding CC-Link IE field CPU module status during communication error occurs on CC-Link IE Field Network Basic

CC-Link IE field When a network such as Network Basic is interrupted, the CPU module does not stop and continues to run. When the CC-Link IE Field Network i... More Details >>
- No：44611
- Release Date：2024/11/28 16:11
Regarding the type of Ethernet connection cable

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When connecting directly to the computer, cr... More Details >>
- No：22295
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:23
Regarding FX5 CPU Module clock settings

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX Works3 　(1) In GX Works3, select On... More Details >>
- No：44365
- Release Date：2024/03/27 17:01
Regarding Control response parameter of built-in PID Control of CPU Module

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast". The difference is as follows. (1)W... More Details >>
- No：44653
- Release Date：2025/03/18 10:23
Regarding reading Sample Comments for Expansion Adapters

You cannot. The expansion adapters does not support reading sample comments. More Details >>
- No：39352
- Release Date：2023/02/15 10:16
Regarding I/O assignment on the module configuration diagram of GX Works3

While the module configuration window is being displayed, the I/O assignment can be checked by selecting the following options from the menu bar: [Edit]→[X... More Details >>
- No：22307
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:25
Regarding the driving contacts of high-speed counter instructions

The current value of the high-speed counter is retained and will not be cleared. More Details >>
- No：39304
- Release Date：2023/02/13 16:40
Regarding how to update the firmware of the FX5 CPU module

FX5U/FX5UC/FX5UJ CPU modules cannot perform firmware update using GX Works3. Use the SD memory card to update the firmware. However, the FX5S CPU module sup... More Details >>
- No：39325
- Release Date：2023/02/14 09:03
Regarding dedicated instruction for JOG operation

There is no dedicated instruction to drive JOG. Use PLSV (variable speed operation) when operating JOG. More Details >>
- No：44355
- Release Date：2024/03/27 15:50
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22

121-130 of Total 179

Inquiries

page top