Be careful when using the FTP server auto transfer function in combination with the following functions. ・FTP client (FT

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast"

The high-speed counter supports 1-phase 1-input, 1-phase 2-input, 2-phase 2-input. The built-in counter in the CPU modu

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numb

The FX3 intelligent function modules cannot be selected from the Element selection window because it does not correspond

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. F

When used as a master station, communication with a slave station can be performed using the simple CPU communication or

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

151-160 of Total 179

prev 16 / 18page next

Regarding use of the FTP Server Auto Transfer Function with Other Functions

Be careful when using the FTP server auto transfer function in combination with the following functions. ・FTP client (FTPPUT instruction) 　The function exe... More Details >>
- No：44336
- Release Date：2024/03/20 13:28
Regarding Control response parameter of built-in PID Control of CPU Module

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast". The difference is as follows. (1)W... More Details >>
- No：44653
- Release Date：2025/03/18 10:23
Regarding the number of available channels of the built-in high speeed counters.

The high-speed counter supports 1-phase 1-input, 1-phase 2-input, 2-phase 2-input. The built-in counter in the CPU module can input up to 8ch. However,... More Details >>
- No：22310
- Release Date：2018/08/30 13:55
- Update：2023/02/13 11:42
Regarding instructions for converting constants from decimal to hexadecimal

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numbers of up to 8 digits can be converte... More Details >>
- No：44352
- Release Date：2024/03/27 15:43
Regarding selection of FX3 intelligent function modules on the module configuration diagram of GX Works3

The FX3 intelligent function modules cannot be selected from the Element selection window because it does not correspond to the parameter setting of GX Works... More Details >>
- No：22304
- Release Date：2018/08/30 13:55
- Update：2024/08/19 09:50
Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
Regarding the "S/S" terminal.

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit the "0V" and "input X***". For sou... More Details >>
- No：22286
- Release Date：2018/08/30 13:55
- Update：2022/12/22 09:39
Regarding the settings of built-in analog function of FX5U CPU module

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. For further details please refer to M... More Details >>
- No：22314
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:20
Regarding MODBUS/TCP communication of the built-in Ethernet port

When used as a master station, communication with a slave station can be performed using the simple CPU communication or the predefined protocol support func... More Details >>
- No：22302
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:52

151-160 of Total 179

Inquiries

page top