When used as a master station, communication with a slave station can be performed using the simple CPU communication or

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later support

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circui

FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an

From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization."

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project an

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device.

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor &gt

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

161-170 of Total 179

prev 17 / 18page next

Regarding MODBUS/TCP communication of the built-in Ethernet port

When used as a master station, communication with a slave station can be performed using the simple CPU communication or the predefined protocol support func... More Details >>
- No：22302
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:52
Regarding communication with MX Component

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later supports the FX5S CPU module. Also, both se... More Details >>
- No：22328
- Release Date：2018/08/30 13:55
- Update：2023/02/15 13:07
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
Regarding the "S/S" terminal.

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit the "0V" and "input X***". For sou... More Details >>
- No：22286
- Release Date：2018/08/30 13:55
- Update：2022/12/22 09:39
Regarding the built-in analog input/output function

FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an external resister is connected, the m... More Details >>
- No：22313
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:47
Regarding the error history

From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can be found. The event history can dis... More Details >>
- No：22305
- Release Date：2018/08/30 13:55
- Update：2023/02/13 11:37
Regarding how to format an SD memory card

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization." More Details >>
- No：39344
- Release Date：2023/02/15 10:03
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
Regarding the function of a special relay.

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device. More Details >>
- No：22288
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:09
Regarding how to Monitor Buffer Memory Values

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor > Common Item > Monitor Buffer Mem... More Details >>
- No：39324
- Release Date：2023/01/12 16:56

161-170 of Total 179

Inquiries

page top