Up to 4 axes can be controlled. Please use a transistor output type CPU module. （By adding a high speed pulse input/outp

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, M

There is no setting or method to disable the login screen for the web server function.

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings c

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan inf

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that s

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameter

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

161-170 of Total 185

prev 17 / 19page next

Regarding the maximum number of controllable axes of the bulit-in positioning function

Up to 4 axes can be controlled. Please use a transistor output type CPU module. （By adding a high speed pulse input/output module, maximum 12 axes (CPU bui... More Details >>
- No：22300
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:52
Regarding the specifications of the built-in Ethernet function of FX5 CPU module

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, MODBUS/TCP, socket communication, and ... More Details >>
- No：22320
- Release Date：2018/08/30 13:55
- Update：2023/07/04 15:52
Regarding the login screen for the Web Server Function

There is no setting or method to disable the login screen for the web server function. More Details >>
- No：44357
- Release Date：2024/03/27 15:52
Regarding expansion of communication ports

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings can be set from GX Works3 parameters. More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2025/11/11 14:20
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
Regarding the method to check the scan time

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan information 　SD520　Current scan time (... More Details >>
- No：22289
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:20
Regarding EtherCAT Communications

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that support EtherCAT communication. More Details >>
- No：39313
- Release Date：2023/02/14 08:54
Regarding the latch settings of data register

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameters] -> [Device/Memory Settings] -&... More Details >>
- No：22329
- Release Date：2018/08/30 13:55
- Update：2024/11/11 13:49

161-170 of Total 185

Inquiries

page top