It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameter

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numb

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization."

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later support

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device.

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

Although the connection with FX2N series I/O modules, FX2 series intelligent function modules, and FX3 series special ad

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

11-20 of Total 185

prev 2 / 19page next

Regarding the latch settings of data register

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameters] -> [Device/Memory Settings] -&... More Details >>
- No：22329
- Release Date：2018/08/30 13:55
- Update：2024/11/11 13:49
Regarding instructions for converting constants from decimal to hexadecimal

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numbers of up to 8 digits can be converte... More Details >>
- No：44352
- Release Date：2024/03/27 15:43
Regarding how to format an SD memory card

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization." More Details >>
- No：39344
- Release Date：2023/02/15 10:03
Regarding communication with MX Component

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later supports the FX5S CPU module. Also, both se... More Details >>
- No：22328
- Release Date：2018/08/30 13:55
- Update：2023/02/15 13:07
Regarding the function of a special relay.

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device. More Details >>
- No：22288
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:09
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
Regarding how to clear simple CPU communication function errors

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU Communication Diagnostic" in GX Work... More Details >>
- No：40049
- Release Date：2023/08/25 09:06
Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
Regardng compatability with other product series

Although the connection with FX2N series I/O modules, FX2 series intelligent function modules, and FX3 series special adater is not possible, FX3 series inte... More Details >>
- No：22309
- Release Date：2018/08/30 13:55
- Update：2022/12/22 09:46
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31

11-20 of Total 185

Inquiries

page top