The IP address can be changed from a program by using the IP address change function. The IP address change function can

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization."

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

32 stations can be connected when RS-485 port is used and only 1 station can be connected when RS-232 port is used.

You can find it in the Advanced Settings section of GX Works3. Use the following procedure to display the Device (High

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagno

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings c

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When conn

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor &gt

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

11-20 of Total 185

prev 2 / 19page next

Regarding how to change the IP address

The IP address can be changed from a program by using the IP address change function. The IP address change function can change the IP address, subnet mask,... More Details >>
- No：39332
- Release Date：2023/02/14 09:09
- Update：2024/08/19 09:52
Regarding how to format an SD memory card

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization." More Details >>
- No：39344
- Release Date：2023/02/15 10:03
Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
Regarding the maximum number of connections for MODBUS communication

32 stations can be connected when RS-485 port is used and only 1 station can be connected when RS-232 port is used. More Details >>
- No：22324
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:49
Regarding checking latch settings

You can find it in the Advanced Settings section of GX Works3. Use the following procedure to display the Device (High Speed) settings. From the GX Wor... More Details >>
- No：44364
- Release Date：2024/03/27 16:05
Regarding how to check MAC Addresses

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagnostics) of GX Works3. More Details >>
- No：39294
- Release Date：2023/02/13 15:37
Regarding expansion of communication ports

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings can be set from GX Works3 parameters. More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2025/11/11 14:20
Regarding the type of Ethernet connection cable

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When connecting directly to the computer, cr... More Details >>
- No：22295
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:23
Regarding how to Monitor Buffer Memory Values

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor > Common Item > Monitor Buffer Mem... More Details >>
- No：39324
- Release Date：2023/01/12 16:56

11-20 of Total 185

Inquiries

page top