The FX5 CPU module's built-in high-speed counter can control up to 8CH. Up to 16CH can be controlled by adding 4 modules

It can be changed. For example, with the positioning instruction, a word device can be assigned to the operand which spe

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

The maximum frequency of the FX5U/FX5UC CPU module is 200kHz and the maximum frequency of the FX5S/FX5UJ CPU module is 1

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization."

The latch range can be set arbitrarily by the customer. The settings can be found in the memory/device settings of CPU p

Device back up is available without using a battery. However, to back up link register (W) and file register (R) devices

When used as a master station, communication with a slave station can be performed using the simple CPU communication or

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up t

From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

41-50 of Total 185

prev 5 / 19page next

Regarding the maximum number of channels of high-speed counters

The FX5 CPU module's built-in high-speed counter can control up to 8CH. Up to 16CH can be controlled by adding 4 modules of FX5-16ET/E□-H (high-speed pulse ... More Details >>
- No：22311
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:34
Regarding address change of positioning operation.

It can be changed. For example, with the positioning instruction, a word device can be assigned to the operand which specifies the positioning address and t... More Details >>
- No：22298
- Release Date：2018/08/30 13:55
- Update：2023/02/14 09:53
Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
Regarding the frequency of high-speed counters

The maximum frequency of the FX5U/FX5UC CPU module is 200kHz and the maximum frequency of the FX5S/FX5UJ CPU module is 100 kHz. More Details >>
- No：22312
- Release Date：2018/08/30 13:55
- Update：2022/12/22 10:18
Regarding how to format an SD memory card

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization." More Details >>
- No：39344
- Release Date：2023/02/15 10:03
Regarding the range of latch devices

The latch range can be set arbitrarily by the customer. The settings can be found in the memory/device settings of CPU parameters. To back up the link regist... More Details >>
- No：22297
- Release Date：2018/08/30 13:55
Regarding the necessity of using a battery

Device back up is available without using a battery. However, to back up link register (W) and file register (R) devices, a FX3U-32BL (battery) is required. More Details >>
- No：22296
- Release Date：2018/08/30 13:55
- Update：2025/11/07 15:52
Regarding MODBUS/TCP communication of the built-in Ethernet port

When used as a master station, communication with a slave station can be performed using the simple CPU communication or the predefined protocol support func... More Details >>
- No：22302
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:52
Regarding CW/CCW(Forward pulse/Reverse pulse) output of the built-in positioning function

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up to 8 axes can be added by adding a hi... More Details >>
- No：22306
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:48
Regarding the error history

From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can be found. The event history can dis... More Details >>
- No：22305
- Release Date：2018/08/30 13:55
- Update：2023/02/13 11:37

41-50 of Total 185

Inquiries

page top