The maximum frequency of the FX5U/FX5UC CPU module is 200kHz and the maximum frequency of the FX5S/FX5UJ CPU module is 1

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the p

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, wr

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP.

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up t

It can be changed. For details, please refer to MELSEC iQ-F FX5 User's Manual (Positioning Control - CPU module built-in

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. F

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numb

This function allows you to select the digital value to perform D/A conversion from the following three patterns dependi

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

71-80 of Total 185

prev 8 / 19page next

Regarding the frequency of high-speed counters

The maximum frequency of the FX5U/FX5UC CPU module is 200kHz and the maximum frequency of the FX5S/FX5UJ CPU module is 100 kHz. More Details >>
- No：22312
- Release Date：2018/08/30 13:55
- Update：2022/12/22 10:18
Regrading using the Positioning Function with a Relay-Output Type FX5 CPU Module

High-speed pulse I/O module : The FX5-16 ET/ES-H can be added regardless of the output type of the CPU Module, and the positioning function can be used with ... More Details >>
- No：44366
- Release Date：2024/03/27 16:19
Regarding changing the current address (user unit, pulse unit)

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, writing is disabled during positioning... More Details >>
- No：39356
- Release Date：2023/02/15 13:03
Regarding EtherNet/IP Communications

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP. More Details >>
- No：39319
- Release Date：2023/02/14 08:57
Regarding CW/CCW(Forward pulse/Reverse pulse) output of the built-in positioning function

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up to 8 axes can be added by adding a hi... More Details >>
- No：22306
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:48
Regarding speed change of positioning operation.

It can be changed. For details, please refer to MELSEC iQ-F FX5 User's Manual (Positioning Control - CPU module built-in, high speed pulse input/output modu... More Details >>
- No：22299
- Release Date：2018/08/30 13:55
- Update：2023/02/14 09:52
Regarding the settings of built-in analog function of FX5U CPU module

The settings can be done using the parameter settings of GX Works3 or by settings the special relay/special registers. For further details please refer to M... More Details >>
- No：22314
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:20
Regarding instructions for converting constants from decimal to hexadecimal

Decimal numbers of up to 4 digits can be converted to hexadecimal numbers using the BCD(P) instruction, and decimal numbers of up to 8 digits can be converte... More Details >>
- No：44352
- Release Date：2024/03/27 15:43
Regarding Data Register Byte Splitting

Use the WTOB instruction. More Details >>
- No：40022
- Release Date：2023/08/24 14:32
Regarding the HOLD/CLEAR function of the built-in analog output

This function allows you to select the digital value to perform D/A conversion from the following three patterns depending on the operating status of the CPU... More Details >>
- No：39289
- Release Date：2023/01/12 16:51

71-80 of Total 185

Inquiries

page top