The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth m

Communication is possible with simple CPU communication function of FX5 CPU, FX5-ENET, FX5-ENET/IP modules. ※FX5U and FX

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

Use the POW (Single Precision Real Power Operation) instruction.

There is no setting or method to disable the login screen for the web server function.

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings c

"Rebuild All" converts the entire project and "Convet" only coverts the modified part of the program.

This function allows you to select the digital value to perform D/A conversion from the following three patterns dependi

It is cleared by eliminating the cause of the error during detection and turning on SM50. For the error codes that can b

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

81-90 of Total 185

prev 9 / 19page next

Regarding simultaneous access to Web Server function

The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth machine. More Details >>
- No：39330
- Release Date：2023/02/14 09:06
Regarding connection through a MODBUS/TCP Gateway

Communication is possible with simple CPU communication function of FX5CPU, FX5-ENET, FX5-ENET/IP modules. ※FX5U and FX5UC CPU modules with firmware version... More Details >>
- No：39343
- Release Date：2023/01/12 17:05
- Update：2023/06/23 11:13
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
Regarding exponentiation

Use the POW (Single Precision Real Power Operation) instruction. More Details >>
- No：40029
- Release Date：2023/08/24 14:38
Regarding the login screen for the Web Server Function

There is no setting or method to disable the login screen for the web server function. More Details >>
- No：44357
- Release Date：2024/03/27 15:52
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
Regarding expansion of communication ports

MODBUS serial communication over multiple communication channels is possible. The MODBUS serial communication settings can be set from GX Works3 parameters. More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2025/11/11 14:20
Regarding program conversion

"Rebuild All" converts the entire project and "Convet" only coverts the modified part of the program. More Details >>
- No：22326
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:40
Regarding the HOLD/CLEAR function of the built-in analog output

This function allows you to select the digital value to perform D/A conversion from the following three patterns depending on the operating status of the CPU... More Details >>
- No：39289
- Release Date：2023/01/12 16:51
Regarding clearing error with SM50

It is cleared by eliminating the cause of the error during detection and turning on SM50. For the error codes that can be cleared on the SM50, refer to the ... More Details >>
- No：39292
- Release Date：2023/02/13 15:37

81-90 of Total 185

Inquiries

page top