It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected.

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the bo

Since the FX5 CPU modules only support the master function, CC-Link IE Field Network Basic communication between FX5 CPU

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan inf

Device back up is available without using a battery. However, to back up link register (W) and file register (R) devices

EN (enable input) ・・・ This is the execution condition of the function. The function with EN is executed o

There is no dedicated instruction to drive JOG. Use PLSV (variable speed operation) when operating JOG.

"Rebuild All" converts the entire project and "Convet" only coverts the modified part of the program.

The difference between the current address (user unit) and the current address (pulse unit) is as follows: The current a

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

81-90 of Total 185

prev 9 / 19page next

Regarding remote I/O expansion for FX5S CPU module

It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected. More Details >>
- No：40041
- Release Date：2023/08/24 15:45
- Update：2025/03/13 10:08
Regarding Boot Operation procedures

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the boot configuration screen. 　 From the... More Details >>
- No：44348
- Release Date：2024/03/27 15:29
Regarding CC-Link IE Field Network Basic Communication Between FX5 CPU Modules

Since the FX5 CPU modules only support the master function, CC-Link IE Field Network Basic communication between FX5 CPU modules is not possible. More Details >>
- No：39297
- Release Date：2023/02/13 16:38
Regarding switching PID instructions for Auto-tuning

It's possible. More Details >>
- No：39320
- Release Date：2023/02/14 09:00
Regarding the method to check the scan time

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan information 　SD520　Current scan time (... More Details >>
- No：22289
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:20
Regarding the necessity of using a battery

Device back up is available without using a battery. However, to back up link register (W) and file register (R) devices, a FX3U-32BL (battery) is required. More Details >>
- No：22296
- Release Date：2018/08/30 13:55
- Update：2025/11/07 15:52
Regarding EN and ENO

EN (enable input) ・・・ This is the execution condition of the function. 　　　　　　　　　　　　　　 The function with EN is executed only if the execution condition of EN... More Details >>
- No：40024
- Release Date：2023/08/24 14:35
Regarding dedicated instruction for JOG operation

There is no dedicated instruction to drive JOG. Use PLSV (variable speed operation) when operating JOG. More Details >>
- No：44355
- Release Date：2024/03/27 15:50
Regarding program conversion

"Rebuild All" converts the entire project and "Convet" only coverts the modified part of the program. More Details >>
- No：22326
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:40
Regarding the difference of current address (user unit, pulse unit)

The difference between the current address (user unit) and the current address (pulse unit) is as follows: The current address (user unit) becomes the unit ... More Details >>
- No：39357
- Release Date：2023/02/15 13:05

81-90 of Total 185

Inquiries

page top