When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The f

The CPU module logging feature is accessed from the CPU module logging configuration tool. If the tool is installed, lau

By using the Time calculation FB library, you can perform calculations that across years, months and days. In the time

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supporte

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the bo

The data name shown in "red" means "unconverted data" or "unused data before conversion." Data name displayed in 'light

Index modification cannot be done for bit specifications for Word device.

You can find it in the Advanced Settings section of GX Works3. Use the following procedure to display the Device (High

From the GX Works3 settings when the optional battery is installed, it must be set to Installed in the Optional Batter

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

81-90 of Total 185

prev 9 / 19page next

Regarding number of CC-Link IE field network Basic connections

When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The following firmware versions are requi... More Details >>
- No：44652
- Release Date：2025/03/18 10:22
Regarding configuring of Data Logging

The CPU module logging feature is accessed from the CPU module logging configuration tool. If the tool is installed, launch it from GX Works3 Tools > Logg... More Details >>
- No：44613
- Release Date：2024/11/28 16:12
Regarding timing across dates

By using the Time calculation FB library, you can perform calculations that across years, months and days. In the time calculation FB library, you can add an... More Details >>
- No：44362
- Release Date：2024/03/27 16:03
Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>
- No：44330
- Release Date：2024/03/20 12:56
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
Regarding Boot Operation procedures

The boot operation function is configured and executed from the GX Works3 parameter settings as follows. (1) Open the boot configuration screen. 　 From the... More Details >>
- No：44348
- Release Date：2024/03/27 15:29
Regarding the text color of file names

The data name shown in "red" means "unconverted data" or "unused data before conversion." Data name displayed in 'light blue' means "unused". If a conversio... More Details >>
- No：39345
- Release Date：2023/02/15 10:06
Regarding bit specification index modification for word devices

Index modification cannot be done for bit specifications for Word device. More Details >>
- No：39299
- Release Date：2023/02/13 16:39
Regarding checking latch settings

You can find it in the Advanced Settings section of GX Works3. Use the following procedure to display the Device (High Speed) settings. From the GX Wor... More Details >>
- No：44364
- Release Date：2024/03/27 16:05
Regarding settings when the battery is installed

From the GX Works3 settings when the optional battery is installed, it must be set to Installed in the Optional Battery Settings. Use the following proc... More Details >>
- No：44363
- Release Date：2024/03/27 17:09

81-90 of Total 185

Inquiries

page top