The date of manufacture of a product can be confirmed by the following methods. ① Name plate verification There is a nam

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameter

From the PC's Internet Protocol Version 4 Properties, uncheck "Obtain an IP address automatically" option and set an arb

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX W

The default IP address (factory default value) of FX5 CPU modules is 192.168.3.250.

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

For issuance of a certificate, please consult your local Mitsubishi representative.

When used as a master station, communication with a slave station can be performed using the simple CPU communication or

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > CPU Module

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ CPU Module ]

1-10 of Total 185

prev 1 / 19page next

Regarding how to check the date of manufacture

The date of manufacture of a product can be confirmed by the following methods. ① Name plate verification There is a name plate on the right side of the pr... More Details >>
- No：44878
- Release Date：2025/03/18 11:11
Regarding the latch settings of data register

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameters] -> [Device/Memory Settings] -&... More Details >>
- No：22329
- Release Date：2018/08/30 13:55
- Update：2024/11/11 13:49
Regarding the cause of communication error with GX Works3

From the PC's Internet Protocol Version 4 Properties, uncheck "Obtain an IP address automatically" option and set an arbitrary IP adress that does not dupli... More Details >>
- No：22319
- Release Date：2018/08/30 13:55
- Update：2023/02/13 11:38
Regarding FX5 CPU Module clock settings

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX Works3 　(1) In GX Works3, select On... More Details >>
- No：44365
- Release Date：2024/03/27 17:01
Regarding the default IP address

The default IP address (factory default value) of FX5CPU modules is 192.168.3.250. More Details >>
- No：22290
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:33
Regarding the "S/S" terminal.

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit the "0V" and "input X***". For sou... More Details >>
- No：22286
- Release Date：2018/08/30 13:55
- Update：2022/12/22 09:39
Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
Regarding the Certificate of non-applicability to export to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22301
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:15
Regarding MODBUS/TCP communication of the built-in Ethernet port

When used as a master station, communication with a slave station can be performed using the simple CPU communication or the predefined protocol support func... More Details >>
- No：22302
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:52
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31

1-10 of Total 185

Inquiries

page top