Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization."

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device).

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and

Multiple connections can be established by using a switching hub.

From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can

The FX3 intelligent function modules cannot be selected from the Element selection window because it does not correspond

Communication is possible with simple CPU communication function of FX5 CPU, FX5-ENET, FX5-ENET/IP modules. ※FX5U and FX

In GX Works3, [Tools] - [Options] - [Conversion] - [Online Program Change], set "Execute Online Program Change in Conver

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

11-20 of Total 62

prev 2 / 7page next

Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
Regarding how to format an SD memory card

In GX Works3, go to Online > CPU Memory Operation, select "SD Memory Card" and execute "Initialization." More Details >>
- No：39344
- Release Date：2023/02/15 10:03
Regarding CC-Link settings using GX Works3

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device). However, when connecting with FX3U-1... More Details >>
- No：22317
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:19
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
Regarding the method to connect with multiple devices via Ethernet port

Multiple connections can be established by using a switching hub. More Details >>
- No：22321
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:26
Regarding the error history

From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can be found. The event history can dis... More Details >>
- No：22305
- Release Date：2018/08/30 13:55
- Update：2023/02/13 11:37
Regarding selection of FX3 intelligent function modules on the module configuration diagram of GX Works3

The FX3 intelligent function modules cannot be selected from the Element selection window because it does not correspond to the parameter setting of GX Works... More Details >>
- No：22304
- Release Date：2018/08/30 13:55
- Update：2024/08/19 09:50
Regarding connection through a MODBUS/TCP Gateway

Communication is possible with simple CPU communication function of FX5CPU, FX5-ENET, FX5-ENET/IP modules. ※FX5U and FX5UC CPU modules with firmware version... More Details >>
- No：39343
- Release Date：2023/01/12 17:05
- Update：2023/06/23 11:13
Regarding How to release Online Program Change

In GX Works3, [Tools] - [Options] - [Conversion] - [Online Program Change], set "Execute Online Program Change in Converting" to "No." More Details >>
- No：44876
- Release Date：2025/03/18 10:26

11-20 of Total 62

Inquiries

page top