You cannot. The expansion adapters does not support reading sample comments.

Multiple connections can be established by using a switching hub.

If cross-references are displayed on GX Works3, you can print them.

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

You can verify from GX Works3 Project - Verify with PLC. Manual GX Works3 Operating Manual

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.0

This is possible with the Guidance flow function. On GX Works3, you can view the setting procedure for the function you

It is not possible to convert to GX Works2 format.

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan inf

If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

31-40 of Total 62

prev 4 / 7page next

Regarding reading Sample Comments for Expansion Adapters

You cannot. The expansion adapters does not support reading sample comments. More Details >>
- No：39352
- Release Date：2023/02/15 10:16
Regarding the method to connect with multiple devices via Ethernet port

Multiple connections can be established by using a switching hub. More Details >>
- No：22321
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:26
Regarding printing of cross-references

If cross-references are displayed on GX Works3, you can print them. More Details >>
- No：44619
- Release Date：2024/11/28 16:10
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
Regarding Project verification

You can verify from GX Works3 Project - Verify with PLC. Manual GX Works3 Operating Manual More Details >>
- No：40028
- Release Date：2023/08/24 14:39
Regarding clearing the maximum and minimum scan times

It can be cleared with the scan time clear function. You can clear maximum and minimum scan time with GX Works3 Ver. 1.085 P or later or by special relays. More Details >>
- No：39342
- Release Date：2023/02/15 10:05
Regarding the procedure for functions set in GX Works3

This is possible with the Guidance flow function. On GX Works3, you can view the setting procedure for the function you want to use. *It is supported by GX ... More Details >>
- No：39341
- Release Date：2023/02/14 17:29
Regarding Project Conversion

It is not possible to convert to GX Works2 format. More Details >>
- No：39326
- Release Date：2023/02/14 09:03
Regarding the method to check the scan time

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan information 　SD520　Current scan time (... More Details >>
- No：22289
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:20
Regarding MELSOFT Products that do not work correctly

If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details. Notes on using the Japanese Input M... More Details >>
- No：40048
- Release Date：2023/08/24 16:32

31-40 of Total 62

Inquiries

page top