For issuance of a certificate, please consult your local Mitsubishi representative.

The default IP address (factory default value) of FX5 CPU modules is 192.168.3.250.

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagno

The IP address can be changed from a program by using the IP address change function. The IP address change function ca

The model name of the power cable is FX2NC-100MPCB. It is included with the FX5UC CPU module and intelligent function mo

It is possible to use latch devices or I/O devices (X/Y) for link refresh devices. However, when using I/O devices (X/Y

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later support

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device).

When used as a master station, communication with a slave station can be performed using the simple CPU communication or

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

Keyword Search：

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

1-10 of Total 97

prev 1 / 10page next

Regarding the Certificate of non-applicability to export to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22301
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:15
Regarding the default IP address

The default IP address (factory default value) of FX5CPU modules is 192.168.3.250. More Details >>
- No：22290
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:33
Regarding EtherCAT Communications

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that support EtherCAT communication. More Details >>
- No：39313
- Release Date：2023/02/14 08:54
Regarding how to check MAC Addresses

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagnostics) of GX Works3. More Details >>
- No：39294
- Release Date：2023/02/13 15:37
Regarding how to change the IP address

The IP address can be changed from a program by using the IP address change function. The IP address change function can change the IP address, subnet mask,... More Details >>
- No：39332
- Release Date：2023/02/14 09:09
- Update：2024/08/19 09:52
Regarding the FX5UC CPU module/Intelligent Function module Power Cable

The model name of the power cable is FX2NC-100MPCB. It is included with the FX5UC CPU module and intelligent function modules that require power from the pow... More Details >>
- No：40021
- Release Date：2023/08/24 14:31
Regarding the link refresh settings of FX5-CCL-MS

It is possible to use latch devices or I/O devices (X/Y) for link refresh devices. However, when using I/O devices (X/Y), use I/O numbers (such as X1000 ~/Y... More Details >>
- No：22308
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:37
Regarding communication with MX Component

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later supports the FX5S CPU module. Also, both se... More Details >>
- No：22328
- Release Date：2018/08/30 13:55
- Update：2023/02/15 13:07
Regarding CC-Link settings using GX Works3

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device). However, when connecting with FX3U-1... More Details >>
- No：22317
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:19
Regarding MODBUS/TCP communication of the built-in Ethernet port

When used as a master station, communication with a slave station can be performed using the simple CPU communication or the predefined protocol support func... More Details >>
- No：22302
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:52

1-10 of Total 97

Inquiries

page top