It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/

The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field n

FX5-CCLGN-MS allows the master station to change the reserved station setting with parameters, but the setting can not b

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When conn

When used as a master station, communication with a slave station can be performed using the simple CPU communication or

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP.

For issuance of a certificate, please consult your local Mitsubishi representative.

When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earli

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

91-100 of Total 106

prev 10 / 11page next

Regarding compatible version of CANopen communication function for PDO communication

It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/FX5UC CPU module ・・・1.260 or later ... More Details >>
- No：44473
- Release Date：2024/07/02 19:06
Regarding CC-Link IE field network support of FX5 CPU module built-in Ethernet

The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field network, add an FX5-CCLIEF. *The FX5-... More Details >>
- No：44877
- Release Date：2025/03/18 10:30
Regarding the change of settings for reserved station (master station) of FX5-CCLGN-MS

FX5-CCLGN-MS allows the master station to change the reserved station setting with parameters, but the setting can not be changed by program. Note that link... More Details >>
- No：39275
- Release Date：2023/01/12 16:46
Regarding the supported version of the simple CPU communication function

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible from the first one. More Details >>
- No：39316
- Release Date：2023/02/14 08:56
Regarding the type of Ethernet connection cable

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When connecting directly to the computer, cr... More Details >>
- No：22295
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:23
Regarding MODBUS/TCP communication of the built-in Ethernet port

When used as a master station, communication with a slave station can be performed using the simple CPU communication or the predefined protocol support func... More Details >>
- No：22302
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:52
Regarding EtherNet/IP Communications

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP. More Details >>
- No：39319
- Release Date：2023/02/14 08:57
Regarding the Certificate of non-applicability to export to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22301
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:15
Regarding handling multiple executions of ADPRW Instructions

When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earlier is completed and communication by ... More Details >>
- No：39354
- Release Date：2023/02/15 10:17
Regarding how to clear simple CPU communication function errors

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU Communication Diagnostic" in GX Work... More Details >>
- No：40049
- Release Date：2023/08/25 09:06

91-100 of Total 106

Inquiries

page top