When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The f

N:N Network, Parallel Link, MC protocol, Non-protocol communication, MELSOFT connection, MODBUS RTU, and Predefined prot

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When conn

PDO mapping is configured from the CC-Link IE TSN configuration settings. ① Open the CC-Link IE TSN configuration sett

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth m

The difference is the maximum transmission distance and the presence/absence of insulation (between the communication li

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT

Please update GX Works3 to the latest version. After updating, FX5-ENET/IP is displayed in the Module configuration diag

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

21-30 of Total 106

prev 3 / 11page next

Regarding number of CC-Link IE field network Basic connections

When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The following firmware versions are requi... More Details >>
- No：44652
- Release Date：2025/03/18 10:22
Regarding communication supported by built-in RS-485 port

N:N Network, Parallel Link, MC protocol, Non-protocol communication, MELSOFT connection, MODBUS RTU, and Predefined protocol support are available. More Details >>
- No：22322
- Release Date：2018/08/30 13:55
- Update：2022/12/22 10:16
Regarding the type of Ethernet connection cable

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When connecting directly to the computer, cr... More Details >>
- No：22295
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:23
Regarding PDO Mapping Settings

PDO mapping is configured from the CC-Link IE TSN configuration settings. ① Open the CC-Link IE TSN configuration settings from the FX5-CCLGN-MS Basic Set... More Details >>
- No：44475
- Release Date：2024/07/02 19:07
Regarding sending emails

Using the email function of FX5-ENET, it is possible to send mail via a mail server. The email function is supported in the following versions. ・Hardware s... More Details >>
- No：40035
- Release Date：2023/08/24 15:40
- Update：2023/08/25 11:34
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
Regarding simultaneous access to Web Server function

The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth machine. More Details >>
- No：39330
- Release Date：2023/02/14 09:06
Regarding the difference between the RS-485 expansion adapter and the extension board

The difference is the maximum transmission distance and the presence/absence of insulation (between the communication line and the CPU). ・Expansion Adapter ... More Details >>
- No：39315
- Release Date：2023/01/12 16:56
Regarding multiple connections for the MQTT communication function

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT communication function has a maximum ... More Details >>
- No：44358
- Release Date：2024/03/27 16:02
Regarding display of FX5-ENET/IP in a Module configuration Diagram

Please update GX Works3 to the latest version. After updating, FX5-ENET/IP is displayed in the Module configuration diagram of GX Works3. Download the lates... More Details >>
- No：39303
- Release Date：2023/01/12 17:13

21-30 of Total 106

Inquiries

page top