The iQ-F series does not support domain specification, so specify the IP address.

Since the FX5 CPU modules only support the master function, CC-Link IE Field Network Basic communication between FX5 CPU

The FX5-CCLGN-MS firmware version 1.010 or later supports a communication speed setting of 100 Mbps.

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

The FX5 CPU module does not support UDP broadcast communication.

It is possible to set the basic/application settings in a program by selecting the parameter setting method to "Program.

This function allows you to select the operation to be performed when the FX5-ENET(MQTT client) reconnects to the MQTT

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

It is possible to mix CC-Link IE Filed Basic and general-purpose Ethernet communication.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

31-40 of Total 97

prev 4 / 10page next

Reagrding specifying an FTP client domain

The iQ-F series does not support domain specification, so specify the IP address. More Details >>
- No：44359
- Release Date：2024/03/27 15:58
Regarding nesting contacts displayed on bus by master control instructions

It is not possible. More Details >>
- No：39361
- Release Date：2023/02/15 13:04
Regarding CC-Link IE Field Network Basic Communication Between FX5 CPU Modules

Since the FX5 CPU modules only support the master function, CC-Link IE Field Network Basic communication between FX5 CPU modules is not possible. More Details >>
- No：39297
- Release Date：2023/02/13 16:38
Regarding the communication speed of FX5-CCLGN-MS

The FX5-CCLGN-MS firmware version 1.010 or later supports a communication speed setting of 100 Mbps. More Details >>
- No：39358
- Release Date：2023/01/12 17:09
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
Regarding UDP communication

The FX5 CPU module does not support UDP broadcast communication. More Details >>
- No：22291
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:49
Regarding parameter setting for FX5-CCL-MS

It is possible to set the basic/application settings in a program by selecting the parameter setting method to "Program." Even if set by "program" is select... More Details >>
- No：39367
- Release Date：2023/01/12 17:12
Regarding the clean session function of MQTT communication function

This function allows you to select the operation to be performed when the FX5-ENET(MQTT client) reconnects to the MQTT broker after communication has been ... More Details >>
- No：40054
- Release Date：2023/08/25 09:02
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
Regarding CC-Link IE Filed Basic Protocol Mixing

It is possible to mix CC-Link IE Filed Basic and general-purpose Ethernet communication. More Details >>
- No：40031
- Release Date：2023/08/24 14:40

31-40 of Total 97

Inquiries

page top