This function allows you to select the operation to be performed when the FX5-ENET(MQTT client) reconnects to the MQTT

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT

The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field n

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU modul

It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected.

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds

When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The f

It is possible to use the MODBUS serial communication with multiple channels. However, only 1 channel can be set as the

In GX Works3, set the FX5-ENET module parameters from Basic Settings - External Device Configuration Settings. In the "

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

51-60 of Total 97

prev 6 / 10page next

Regarding the clean session function of MQTT communication function

This function allows you to select the operation to be performed when the FX5-ENET(MQTT client) reconnects to the MQTT broker after communication has been ... More Details >>
- No：40054
- Release Date：2023/08/25 09:02
Regarding multiple connections for the MQTT communication function

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT communication function has a maximum ... More Details >>
- No：44358
- Release Date：2024/03/27 16:02
Regarding CC-Link IE field network support of FX5 CPU module built-in Ethernet

The built-in Ethernet on the FX5 CPU module does not support CC-Link IE field networks. If you use a CC-Link IE field network, add an FX5-CCLIEF. *The FX5-... More Details >>
- No：44877
- Release Date：2025/03/18 10:30
Regarding error 2440H on CPU module when using FX5-CCLGN-MS

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU module is also notified of the error. Ther... More Details >>
- No：39282
- Release Date：2023/01/12 16:49
Regarding remote I/O expansion for FX5S CPU module

It is possible to connect to remote I/O with CC-Link IE Field Network Basic. Up to 16 remote stations can be connected. More Details >>
- No：40041
- Release Date：2023/08/24 15:45
- Update：2025/03/13 10:08
Regarding nesting contacts displayed on bus by master control instructions

It is not possible. More Details >>
- No：39361
- Release Date：2023/02/15 13:04
Regarding Selecting a mapping pattern for PDO communication

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds to the profile position mode (pp), ... More Details >>
- No：44477
- Release Date：2024/07/02 19:06
Regarding number of CC-Link IE field network Basic connections

When the FX5 CPU Module is used as the master station, the maximum number of devices connected to 1 network is 16. The following firmware versions are requi... More Details >>
- No：44652
- Release Date：2025/03/18 10:22
Regarding expansion of communication ports

It is possible to use the MODBUS serial communication with multiple channels. However, only 1 channel can be set as the master. The MODBUS serial communica... More Details >>
- No：22323
- Release Date：2018/08/30 13:55
- Update：2023/06/26 09:04
Regarding setting up encrypted communication (TLS) for FX5-ENET

In GX Works3, set the FX5-ENET module parameters from Basic Settings - External Device Configuration Settings. In the "Ethernet Configuration" screen, selec... More Details >>
- No：40050
- Release Date：2023/08/25 08:48

51-60 of Total 97

Inquiries

page top