The maximum link points of the FX5-CCLIEF are 384 points each for RX/RY and 1024 points each for RWw/RWr.

The batch setting of PDO mapping sets the default PDO mapping for all device stations that support PDO mapping. *Note th

No, there is no function to resend all the data that could not be sent. By setting Retain and QoS from FB, it is possibl

RWr is allocated to TPDO and RWw is allocated to RPDO.

The CC-Link IE TSN has a CC-Link IE TSN Class B/A, and the available switching HUBs are also specified by supported stan

The following ranges overlap. Or the range of file register (R) used has been exceeded. Check whether the file register

Class1 communication sends and receives data at regular intervals. It is mainly used for I/O communication and motion co

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds

FX5-CCLGN-MS supports 1 Gbps communication speed with firmware version: 1.010, and 1 Gbps and 100 Mbps communication spe

The following are possible causes for communication not being established between the Certificate Configuration Tool for

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

1-10 of Total 106

prev 1 / 11page next

Regarding FX5-CCLIEF Maximum Link Points

The maximum link points of the FX5-CCLIEF are 384 points each for RX/RY and 1024 points each for RWw/RWr. More Details >>
- No：40020
- Release Date：2023/08/24 14:31
Regarding understanding the difference between "Batch Setting of PDO Mapping" and "PDO Mapping Setting".

The batch setting of PDO mapping sets the default PDO mapping for all device stations that support PDO mapping. *Note that in the batch setting of PDO mappi... More Details >>
- No：44476
- Release Date：2024/07/02 19:06
Regarding the MQTT communication function retransmission function

No, there is no function to resend all the data that could not be sent. By setting Retain and QoS from FB, it is possible to resend only the latest message. More Details >>
- No：44368
- Release Date：2024/03/27 16:56
Regarding TPDO and RPDO allocation

RWr is allocated to TPDO and RWw is allocated to RPDO. More Details >>
- No：44479
- Release Date：2024/07/02 19:06
Regarding the switching Hubs that can be used for CC-Link IE TSN

The CC-Link IE TSN has a CC-Link IE TSN Class B/A, and the available switching HUBs are also specified by supported standards, synchronization accuracy, etc.... More Details >>
- No：39284
- Release Date：2023/01/12 16:50
Regarding Error code of FX5-ENET Mail send FB: H210

The following ranges overlap. Or the range of file register (R) used has been exceeded. Check whether the file register (R) is exceeded or not. ・area of de... More Details >>
- No：44608
- Release Date：2024/11/28 16:11
Regarding features of EtherNet/IP Communication

Class1 communication sends and receives data at regular intervals. It is mainly used for I/O communication and motion control between PLC and sensor. Class... More Details >>
- No：45485
- Release Date：2025/11/12 13:55
Regarding Selecting a mapping pattern for PDO communication

On the FX5-CCLGN-MS, select "3rd Transmit PDO Mapping" and "3rd Revive PDO Mapping." The 3rd mapping pattern corresponds to the profile position mode (pp), ... More Details >>
- No：44477
- Release Date：2024/07/02 19:06
Regarding the connection between FX5-CCLGN-MS and inverter

FX5-CCLGN-MS supports 1 Gbps communication speed with firmware version: 1.010, and 1 Gbps and 100 Mbps communication speed for version 1.010. If the communi... More Details >>
- No：39281
- Release Date：2023/01/12 16:48
Regarding communication testing of Certificate Configuration Tool for FX5-ENET

The following are possible causes for communication not being established between the Certificate Configuration Tool for FX5-ENET and FX5-ENET. (1) Connecte... More Details >>
- No：40075
- Release Date：2023/08/25 09:06

1-10 of Total 106

Inquiries

page top